Page 1 of 2

NEW speaker setup (UPDATED)

Posted: Sat Sep 27, 2008 3:41 pm
by shredex
I was given a 6x9 Sony Punch speaker which has alot better sound quality than the 5x7 speaker that came out of a Ford.
So im putting the Sony onto my bike. But its to big to mount it how I had the other one mounted, so I have to make a box for it.
Im going to make this setup much better.
*on/off switch
*LED lights which 3-Way toggle switch (can switch to pulse with the music)
I am going to cut out an oval on the top of my rear fairing and put a piece of plexiglass there and have the LED's shining through.
Ill should have everything done tonight except for the plexyglass part.

heres how im going to wire it.
Image


heres what I have so far... I will also be fiberglassing over the partical board so its waterproof and looks better. :banana:
Image
the setup
Image
computer speaker amp
Image
heres where I will put plexiglass so you can see the speaker with red LED's
Image
Image
Image
temperary plastic
Image
Image
need another strip of LED's
Image
Image
heres how it sounds
http://www.youtube.com/watch?v=QRs5xHYBGeI

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 3:44 pm
by 95FZR600
You should check into an outdoor speaker. That way any moisture you get will not effect it.

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 3:46 pm
by shredex
95FZR600 wrote:You should check into an outdoor speaker. That way any moisture you get will not effect it.
luckly, the speaker is a marine speaker.
it can get wet :headbang:

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 4:10 pm
by demon_knight69
LOL2 thats awesome! if the fat guys on goldwings can have tunes, why not you? rock on bro! :headbang:

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 4:30 pm
by 95FZR600
demon_knight69 wrote:LOL2 thats awesome! if the fat guys on goldwings can have tunes, why not you? rock on bro! :headbang:

Heard that! Let me know how it works out. I will be doing this for the Intruder. Im looking to mount the speakers or speaker on the handlebars right behind the front wind shield.

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 4:38 pm
by PIMPMYFZR
Get you some of those little bose cubes lol space savers only problem they might cost as much as the bike lol

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 5:50 pm
by shredex
PIMPMYFZR wrote:Get you some of those little bose cubes lol space savers only problem they might cost as much as the bike lol
VERY true. lol.
ill stick with what iv got for now.

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 5:54 pm
by shredex
95FZR600 wrote:Heard that! Let me know how it works out. I will be doing this for the Intruder. Im looking to mount the speakers or speaker on the handlebars right behind the front wind shield.
I have no clue how the hell your going to make the mount for that. good luck though!

I wonder what amp they use on the crusier bikes for there speakers, that would be alot better than a computer speaker amp. I just need to find one, but I cant.

alright, well, Im heading out to the Wal-mart to buy some cheap ass 12v computer speakers to steal the amp out of them for my project.
be back in a little!

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 8:14 pm
by 95FZR600
Your bike looks much better with fairings on it. Keep us posted and lots of pics.

Re: NEW speaker setup

Posted: Sat Sep 27, 2008 8:56 pm
by cad600
Try to seal the box for the speaker. 6x9's usually sound like crap when run as "free air". Especially marine speakers.

Re: NEW speaker setup

Posted: Sun Sep 28, 2008 12:09 am
by YAM93
+1 on sealing the box

here's a fun link that's more for cars, they do have some stuff for bikes, but only list 1 Yamaha and some Harleys.
I say buy a couple of these puppies and schlap them on the sides of your bike at sharp angle and you can have big bass and pretend it's a V-twin.

http://www.bazooka.com/products/mobile/ ... woofers-C6

On a more serious note, that toilet water is making me thirsty.
:P .............. :rofl: :thumbsup:

Re: NEW speaker setup

Posted: Sun Sep 28, 2008 12:34 am
by 95FZR600
YAM93 wrote:+1 on sealing the box

here's a fun link that's more for cars, they do have some stuff for bikes, but only list 1 Yamaha and some Harleys.
I say buy a couple of these puppies and schlap them on the sides of your bike at sharp angle and you can have big bass and pretend it's a V-twin.

http://www.bazooka.com/products/mobile/ ... woofers-C6

On a more serious note, that toilet water is making me thirsty.
:P .............. :rofl: :thumbsup:

Pretty cool stuff there.

Re: NEW speaker setup

Posted: Sun Sep 28, 2008 11:23 am
by shredex
well, I guess I cant wire my LED's to pulse with the music because they need constant power. banghead
The Computer speakers I boughts power was 9v, so I cant stick it to the bikes battery instead, I bought a 9v battery and wired it to that and it worked.
The LED's work with the 9v battery eveb though there 12v, so Im wiring them to an on/off switch and to another 9v.
I need a waterproof case for the computer amp. but theres not ANY room left under the tail fairing.
Ill have pics up later

Re: NEW speaker setup

Posted: Sun Sep 28, 2008 2:37 pm
by shredex
the setup
Image
computer speaker amp
Image
new sign pic.
Image

Re: NEW speaker setup

Posted: Sun Sep 28, 2008 3:51 pm
by megaloxana
lol you're outta control man...keep it up