FZRSupport: the FZROnline Archive

Post a video of how your bike sounds...

I rode around a bit with my camera mounted to a quick mount that i made. So i thought i'd post the video, i love how this thing sounds, it's got a nice little rumble to it now that it's fixed up, there is another video on my youtube that is what it sounded like after i revived it. I wanted to record it before I put the YZF600 4-2-1 exhaust on it and run the 2.5 inch exhaust from the header into the yosh pipe.

The only thing I don't like about the video is there is some loose bolt near where the camera was that you can only hear in the camera. I'll have to look at that tomorrow and see where it's coming from.

http://www.youtube.com/watch?v=LTlhzPESMH4

I have a front and rear bullet camera set up on my bike.There powered by the bikes battery and with the mics hoked up it makes a god aweful whining noise from the charging system so I dont have any video/audio while riding.
Heres the test video from my ram air thread.I only rev it to maybe 4 or 5 grand,I dont know I wasent looking.I'll get a better one tomorrow...

http://www.youtube.com/watch?v=SDQy3BA2EHM <------

Oh and I have this one doing a burn out befor I change my tires.You get a better sound on this one....

http://www.youtube.com/watch?v=khbfOFijx9M <--------

i just got a strip of aluminum left over from my tail mod and made a bracket for my sony digital camera and it has it's own power, i had to tape a little plastic flap over the speaker to block wind, i think it worked out pretty well. I just bolted it to the mount using the tripod mount on the bottom of the camera. I would trust it on long rides, but i don't want to get my camera wet if it rains, this was just to record the sound before the new header is on.

This is the best I have. Its from my old FZR with an R6 can.

http://www.youtube.com/watch?v=J5PIWv-msrM

Match, mine sounds almost identical to yours. Im running a full V&H SuperSport

Guys,


TAg your youtube videos http://www.fzroline.com.. IT drives up our search iengine ranking.. please

old_school wrote:Guys,


TAg your youtube videos http://www.fzroline.com.. IT drives up our search iengine ranking.. please

done, i tagged all mine, do i have to put that exact url? or can i just put fzronline.com?

this is my Yoshi slip with k&n filter , nothing else 1 by the can , 1 by the tach

Bet my old car's louder

http://s189.photobucket.com/albums/z79/ ... b92318.flv

you can just hear a stutter at low revs as it takes up load...turned out to be a knackered coil pack...

Fartblood wrote:Bet my old car's louder

http://s189.photobucket.com/albums/z79/ ... b92318.flv

you can just hear a stutter at low revs as it takes up load...turned out to be a knackered coil pack...

And your also driving on the wrong side of the road.

Finally after more than a month of screwing with my 2 computers here I got my wife's a firewire card and it works. My computer on the other hand is totally fried. Guys-- all your videos sound great, FB especially that Mi16 (who makes that??). PIMP- i think either the recording is bad or your bike is really loud and high pitched. Maybe sounds worse because it's not under load. Anyway, finally got this done and posted to YouTube in the past few hours.

First part is of the dogbone installation and then me riding it. Enjoy !

http://www.youtube.com/watch?v=4iPjgTz1TtI

...gawd... YouTube sure makes the resolution worse.

(oh yeah, this is WITH the "Quiet-Core insert")

It's a Peugeot 405 Mi16, the later 2 litre. Best handling saloon I ever drove by a huge margin. Only reckoned to be about 700 left now