FZRSupport: the FZROnline Archive

I was browsing around on other forums and came across this. Should work for us FZR guys. I've been wanting to replace my mirrors for a while now, they don't even match (one is gloss black, one is flat black)

http://www.yzf600r.com/phpBB2/viewtopic.php?t=34733

Better pic of the mirrors on a bike:


Here is a good site to get the mirrors from:

http://www.d2moto.com/Items/m017-black? ... %20Mirrors

Looks like you would get good visibility from those. Nice find.

I have never heard of such a thing. Mirror mod?

To many directions for me to follow. I have ADHD.









Thats pretty cool and should work.

95FZR600 wrote:I have never heard of such a thing. Mirror mod?

To many directions for me to follow. I have ADHD.









Thats pretty cool and should work.

Too many directions? I think you can handle a couple screws and bolts after doing the tail and tank swap fiasco!

So are you gonna do it, cell? If you do, take pictures and write up a how-to perhaps

megaloxana wrote:So are you gonna do it, cell? If you do, take pictures and write up a how-to perhaps

Yeah, I'm gonna order them tomorrow I think. One step at a time, still trying to get all the fit and finish of the tank/tail together.

my mirrors look alot like them i got some 04 05 gsxr 600 mirrors took off the bracket that bolts to the bike and fliped them over put the bolt in and attatched them to the bike .

Nice. I've been riding around with 03 GXSR Mirrors bolted in the FZR mirrors bases on my bike for over a year now (see my sig??). I can see completely behind me although things get a little blurry the closer you get to 100mph. I did it the same way as mentioned in that thread.

i really liked the visability i got with them you really could see behind you and i dident even have to pull in my sholder.

Even the cardboard fiber aftermarket mirrors are not long enough to get around my shoulders but they do. Cant wait to see more feedback on these.

i just used the gsxr base as well the holes are spaced ilittle to far apart but i ground the hole out alittle and you can see the bolt in the base because its fliped but i love them.

Just thought I would update this thread. I did the mod a while back, I have pictures of the process (it wasn't that difficult really), and I love the way these things look plus they have a lot better visibility than the stockers. Here is a frontal shot, all the detailed pics are on my other camera, which I'll get later....