Stator Question

[B.Shady]

I purchased an electrosport stator and pickup coil which looks like the stator i removed with one exception. In addition to the two plasitc connectors there is a white wire with a spade connector. Does anybody know what this is for and what it connects to?

[sweekster]

so would you mind posting a pics? It sound like it may be a ground of some kind but that's just a guess. Does the bike start up?

[B.Shady]

I couldn't figure out how to post a picture in my message, so here is a link to the picture. The wire in question is the one the one towards the top of the picture that is reflecting due to the flash.

[Luke-a-Tron]

I think it just pulled out of the connector. There should be 3 wires coming from the stator and going to the VR.

[sweekster]

I couldn't figure out how to post a picture in my message, so here is a link to the picture. The wire in question is the one the one towards the top of the picture that is reflecting due to the flash.

Fix the link for ya...

I have to agree with Luke on that. Looks like that wire was just pulled out of the plug.

[B.Shady]

Can i shove it back into the plastic connector with a screwdriver?

[Luke-a-Tron]

Most likely. Look at the other two and see what's going on there. You might need to rig something up to keep it there because there's probably a little plastic tab that's broken off.

[B.Shady]

Ok.

Thanks for your help guys.