FZRSupport: the FZROnline Archive

Hello guys and gals...been out for a while but I'm starting my project back up... Like the title states, need some feedback regarding gauges. I got my bike with no gauges at all and it was missing all the plastics except the tail peices and a brand new solo seat cowl that's never been put on the bike. So going the original route is just way too much for plastics so I'm going the café racer route/style which I like a lot. Now, the question is if there are other gauges that can be used? I know there are and have a couple in mind but I need a temperature gauge that would not look out of place. Been thinking of going with old school looking gauges but still would need the temp gauge. Trying to find a "mini" style one to no avail. If anyone has custom gauges on their fzr and would be so kind as to post pics and/or point me in the right direcction I will greatly appreciate it. I'm aiming for as clean a look as possible since they will be exposed and don't really want something too bulky that would take away from the look I want too much. Thanks and hope someone can help with some input...


Marcos

Ok...been reading up on some stuff on the hybrid section as well as the streetfighter section too...but id anyone else has any advice it is welcomed. I also need to figure out a couple of other stuff too. My bottom crankcase is slightly damaged from where the clutch pushrod had broken. It mest up the seal and gouged the case a bit so the pushrod might have some downward play...the seal can seal it but I'm afraid to leave it as is and eventually having to replace everything up because it got messed up so will have to look for a bottom engine case too and the far left carb b/c the one it has had the top broken and I just epoxied it. It sealed so hopefully it will do the jon... Thanks!!!!!


Marcos...