FZRSupport: the FZROnline Archive

i am looking to some Dual Headlight and it ask me for Fork Tube Size . it the chart they have right are they 38 mm if not what size are they? i have a 1994 600

From your avatar pic it looks like you have the stock fork tubes, which makes them 38mm. I suppose you're looking for a streetfighter headlight assembly for your bike? Any clamps you get to go on your bike have to be 38mm.

Hope that helps.

thanks finch yes they are stock. i am looking for streetfighter headlight. they ask for the size of the forks for the clamps to mount them i just want to be sure they are right size befor i order them

Then the 38mm clamps should treat you well. If you are "streetfightering-out" your bike, one thing you may consider before ordering the headlight is what to do about the terribly soft front suspension. It would sorta suck to get an awesome headlight on your bike, and then a few months from now decide to to a fork swap for newer/better forks (which you could always rebuild them with springs/cartridge emulators) and have to buy the clamps all over again.

All that to say, be sure to plan ahead.

Contact abs600fzrr and buy his 636 front fork setup. It would MAKE your street fighter

Yeah no need to worry about whether it will work on an FZR because it curretly IS on an FZR. as Borat says "It's NIIIIIICE"

well i might just have to look him up and see whats up