My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 9:48 pm
I bought this as someone's left over project about two years ago and recently decided to get started on it. Here are a few before pictures:
FZRSupport: the FZROnline Archive
My 1997 FZR 600 Restoration Project
Page 1 of 1
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 9:54 pm
And a few more:
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:07 pm
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:12 pm
Then i soda blasted the frame and some of the metal components with the plan to paint the bike:
Removing steering bearings
Sent from my iPhone using Tapatalk
Removing steering bearings
Sent from my iPhone using Tapatalk
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:16 pm
Decide to powder coat the frame, rims, brake bar, swing arm, sub frame, and a few other parts:
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:23 pm
Began cleaning parts and reassembly:
New bearings, cleaned rotors, calipers and bolts:
Sent from my iPhone using Tapatalk
New bearings, cleaned rotors, calipers and bolts:
Sent from my iPhone using Tapatalk
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:26 pm
My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 10:36 pm
I have a little more to do on the calipers, then I can begin plumbing the new brake lines. Rear sprocket is due to arrive tomorrow. Then I will route the wiring through the frame.
I have a couple of last items to be powder coated. Then I can reassemble the bird cage, the headlight, speedo, etc.
I do have blue dot calipers that I was thinking about using, but not sure yet.
Then I will start cleaning and rebuilding the carburetors before I jump back to the motor.
I plan to paint the plastics early in the spring. Not sure of color yet, I am thinking a gloss black or a silver.
Sent from my iPhone using Tapatalk
I have a couple of last items to be powder coated. Then I can reassemble the bird cage, the headlight, speedo, etc.
I do have blue dot calipers that I was thinking about using, but not sure yet.
Then I will start cleaning and rebuilding the carburetors before I jump back to the motor.
I plan to paint the plastics early in the spring. Not sure of color yet, I am thinking a gloss black or a silver.
Sent from my iPhone using Tapatalk
Re: My 1997 FZR 600 Restoration Project
Posted: Tue Jan 07, 2014 11:07 pm
Looking good 
Sent from my C771 using Tapatalk 2
Sent from my C771 using Tapatalk 2
My 1997 FZR 600 Restoration Project
Posted: Wed Jan 08, 2014 8:13 pm
Thanks. It's been something to keep me busy and out of the cold this winter.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: My 1997 FZR 600 Restoration Project
Posted: Thu Jan 09, 2014 9:18 am
It looks extremely nice so far, good luck the rest of the way!
Re: My 1997 FZR 600 Restoration Project
Posted: Tue Jan 21, 2014 11:01 pm
New pads should be here tomorrow. Last few pieces (bird cage & intake tubes) due back from powder coaster tomorrow too. Brake lines are plumbed, but no fluid yet. Wiring harness will be routed, then attaching head light and speedo to bird cage this weekend. Will post photos soon...
Re: My 1997 FZR 600 Restoration Project
Posted: Wed Jan 22, 2014 2:22 pm
The bike is looking great. My only suggestion would be to do yourself a favor and ditch the stock shock for an R6 upgrade kit. If you're spending all this time and money on a rebuild you might as well enjoy riding it after you're done. That's hard to do with the pogo stick rear.
Re: My 1997 FZR 600 Restoration Project
Posted: Wed Jan 22, 2014 6:24 pm
That's a great job. You are giving me motivation.