1995 fzr 600 genesis starting problem
Posted: Mon Oct 21, 2013 8:51 pm
Hi all, im new to the forum,
I just got a fzr 600 genesis 1995 for cheap for 380 with the helmet.
Well to make it short, when i came to see it , was starting the first shot, no idle problem, no smoke , nothing, no leak.
I took it into my trailer and bring hit to my house, by the time ive stopped to look at my strap if they was ok, and ive seen some little gaz leaking near the pitcock
so i closed the valve.
Arrived at my house, i wanted to make a nice ride, and i tried to start the bike. i put the valve back on, the cable clucth is tight like on the petcock but anyway, was gaz leaking there a bit when on position on far to the right , if a little to the left not at off position but only a little to the right its not leaking anymore.
so i was tryng to start it etc, only wanted a little but i was not able to start it. it wanted to but no.
so i tried with choke etc, nothing.
After like 5 minute ot start and blabla start,. i stoppet to pressing th etsart button, anf got a big big shotgun sound in the muffler.
done that 2-3 time every time i tried to start the bike.
So anyway i took the carburator out etc but i did not understand where to clean etc.
i just seen the video here in this forum about 20 minute ago how to clean jet carb etc but i already took the bike to a man i kno that repair yamaha motor ( boat one )...
Anyone have an idea what it can be ??? ( when it was in my trailer it bounced a lot caus the street here are very bad ) ( maybe the gaz f*ck in the carb like a motocross while making some jump ??? )
THanks for the tips....
I just got a fzr 600 genesis 1995 for cheap for 380 with the helmet.
Well to make it short, when i came to see it , was starting the first shot, no idle problem, no smoke , nothing, no leak.
I took it into my trailer and bring hit to my house, by the time ive stopped to look at my strap if they was ok, and ive seen some little gaz leaking near the pitcock
so i closed the valve.
Arrived at my house, i wanted to make a nice ride, and i tried to start the bike. i put the valve back on, the cable clucth is tight like on the petcock but anyway, was gaz leaking there a bit when on position on far to the right , if a little to the left not at off position but only a little to the right its not leaking anymore.
so i was tryng to start it etc, only wanted a little but i was not able to start it. it wanted to but no.
so i tried with choke etc, nothing.
After like 5 minute ot start and blabla start,. i stoppet to pressing th etsart button, anf got a big big shotgun sound in the muffler.
done that 2-3 time every time i tried to start the bike.
So anyway i took the carburator out etc but i did not understand where to clean etc.
i just seen the video here in this forum about 20 minute ago how to clean jet carb etc but i already took the bike to a man i kno that repair yamaha motor ( boat one )...
Anyone have an idea what it can be ??? ( when it was in my trailer it bounced a lot caus the street here are very bad ) ( maybe the gaz f*ck in the carb like a motocross while making some jump ??? )
THanks for the tips....