Page 1 of 1
520 Chain Conversion
Posted: Wed Oct 02, 2013 7:18 am
by tclayton9
WEll I have decided to take off my extended swingarm and go back to the stock swingarm with the 520 chain. I looked at the gearing chart and I was thinking about going to the 16 front and 44 rear combination for faster speed. My question is what sprocket combination should I use to get and feel the most torque? Also, what is the stock linkage for the fzr chain.
Re: 520 Chain Conversion
Posted: Wed Oct 02, 2013 8:24 am
by DonTZ125
'Faster speed' is a meaning-free statement. Do you want more top end? Taller front and/or shorter rear - but you probably won't ever achieve that top speed. Better acceleration? Shorter front (within reason - min 14, preferred 15, for chain life and swingarm guard wear) and/or taller rear.
Re: 520 Chain Conversion
Posted: Wed Oct 02, 2013 7:24 pm
by tclayton9
Im sorry for the confusion. I would like better acceleration. So exactly what front and rear combination would I need with a 520 chain.
Re: 520 Chain Conversion
Posted: Thu Oct 03, 2013 1:57 am
by thatkid
15/50 for acceleration and chain life. I can sell you a nice kit if you'd like.
Re: 520 Chain Conversion
Posted: Thu Oct 03, 2013 1:03 pm
by tclayton9
how much and what comes with it
Re: 520 Chain Conversion
Posted: Tue Oct 22, 2013 6:45 pm
by tclayton9
can I use a 54 rear and a 15 front
Re: 520 Chain Conversion
Posted: Tue Oct 22, 2013 7:46 pm
by thatkid
You could if you wanted your top end to be about 90mph.