Newbie needing advice

[scotty110788]

First of all, hi. Just bought a fzr600r 94, about to do the shims, purchased fresh oil, valve seal and gasket. I know all measurements for clearances and general idea how to do it, what I don't is how there is 2 shims per measurement so how will I know what one is off? 4 in, 4 ex, but 16 shims, hope you understand my question. Thanks for your help in advance.

[DonTZ125]

There are 8 intake and 8 exhaust valves.

[scotty110788]

Oh right, I thought there was 4 cyclinders to measure for each?

[DonTZ125]

Yes - each cyl has 2 intake and 2 exhaust valves.

If you're going to check your valve clearances, you need a manual. If you don't know how many valves your engine has, you don't have a manual ...

[scotty110788]

Newbie mistake, never go off a YouTube video, sorry for confusion : )