how many rpms before you shift gears?

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
eric22rob
Site Newbie
Posts: 3
Joined: Mon Apr 22, 2013 9:49 am
Location: upper darby

how many rpms before you shift gears?

Post by eric22rob »

im confused on when i should shift gears in my 95 yamaha fzr. when should i shift from first to second, and second and third, so on and so forth, etc?
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:

Re: how many rpms before you shift gears?

Post by DonTZ125 »

It depends on where and how you're riding. Just puddling around town on a cracked throttle you might shift at 7 or 8k. If you're absolutely caning it you want to shift closer to 11k. It also depends on your mood - I've trickled through slow traffic in first while turning over 17k, just to watch the heads snap around looking for this unholy SHRIEK! :banana:
User avatar
kilika2
1000+ Posts
1000+ Posts
Posts: 1268
Joined: Thu Sep 24, 2009 2:50 pm
Location: South East Missouri
Contact:

Re: how many rpms before you shift gears?

Post by kilika2 »

Just shift some time before the red bar. Jk. Seriously though just like Don said just shift when you want as a general rule of thumb keep it above 3k.

Chris.
ImageImageImage
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)


1995 FZR600 Sold :-(
2006 R1 Sold :-\
2009 Buell 1125R :-)
JasonRDfan
Level 2.0
Level 2.0
Posts: 239
Joined: Fri Jul 06, 2012 6:15 am
Location: Pittsburgh, PA

Re: how many rpms before you shift gears?

Post by JasonRDfan »

If I'm slowly accelerating through town I change around 3,500. Pulling out of side road 5,000 If I'm on an on ramp 7 to 8 thousand if I'm running hard 11,500 to 12,000.
92 fzr600 Vance & Hines edition, galindo f1 grips, Vance & Hines super sport complete exhaust, oem clutch with Vance & Hines springs, Piaa horn, Hella headlight, Vance & Hines power pak, passenger seat cowl, 07 r6 regulator, ballistic evo2 8 cell, JT 14 tooth sprocket, Joe Florida sportbike multi-color led kit, galindo bar ends,
eric22rob
Site Newbie
Posts: 3
Joined: Mon Apr 22, 2013 9:49 am
Location: upper darby

Re: how many rpms before you shift gears?

Post by eric22rob »

Yeah I mean I usually shift at like 4k around, just riding around
Post Reply