I have 95 fzr 600 fox eye, my query is, my brake light works when I press front brake but not when I use back brake, any ideas? Is this normal and is it an MOT fail?
Any suggests would be greatly appreciated
Brake light doesn't work
Moderators: Site Director, FZR Forum Moderators
Brake light doesn't work
BigSte987 - 95 FZR Foxeye
-
- 100+ Posts
- Posts: 107
- Joined: Mon Jul 02, 2012 4:49 am
- Location: Arizona, USA
Brake light doesn't work
Behind the foot brake lever there should be a spring that connects to the light switch. If the spring is connected then the switch needs to be adjusted. There are two nuts on top and below the bracket. Unscrew the bottom one a bit then screw the top one to tighten it back down and check if its working.
- GreyImport
- Level 2.0
- Posts: 233
- Joined: Fri Jun 22, 2012 3:07 am
- Location: Sunny Australia
Re: Brake light doesn't work
It will look something like this.....dont forget to make sure its plugged into the harness



1990 FZR250R 3LN1
1977 Triumph Bonneville 750 T140V


http://2fiftycc.com/index.php
EMAIL: greyimport@2fiftycc.com
LiteTek Carburettor Seal Kits
http://www.litetek.co/index.html
1977 Triumph Bonneville 750 T140V


http://2fiftycc.com/index.php
EMAIL: greyimport@2fiftycc.com
LiteTek Carburettor Seal Kits
http://www.litetek.co/index.html
Re: Brake light doesn't work
Yeah, these things are annoying - if they aren't NOT working, they like to jam ON, so you still have no effective brake signal ... Give the little plunger in the middle (at the end of the spring) a spritz of WD40 when you get in there, keep things moving nicely.
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
Re: Brake light doesn't work
Just to let you all know, I adjusted it and it worked, thanks for your help
BigSte987 - 95 FZR Foxeye
- KillerCobra
- Site Newbie
- Posts: 33
- Joined: Fri Mar 29, 2013 3:44 am
- Location: Fremont Ca
Re: Brake light doesn't work
I have the same issue but reverse. Light works on pedal but not front lever. Any typical causes? I also have a single 7" headlight the PO installed. Could this have anything to do with it? I'm new to bikes so I don't really know where to start. Any suggestions?
1999 Ford SVT Cobra
1997 Yamaha FZR600R
1997 Yamaha FZR600R
Re: Brake light doesn't work
The front switch itself rarely fails, but is vulnerable to having the push-on connectors yanked off. Make sure the silly thing is still plugged in!
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
- KillerCobra
- Site Newbie
- Posts: 33
- Joined: Fri Mar 29, 2013 3:44 am
- Location: Fremont Ca
Re: Brake light doesn't work
OK I'll check that when I get home and report back. Thanks.
1999 Ford SVT Cobra
1997 Yamaha FZR600R
1997 Yamaha FZR600R