intake boots

[cntryboy85]

i have a 95 fzr 600 3HE that i need intake boots for and am having a hard time finding boots and not paying $248.00 for them. does any one know of any other boots that would work on the bike. maybe newer boots wont be quite as expensive.

[thatkid]

I can get them for about $125 I think.

[cntryboy85]

can you check and see if you can get them. right now i really just need one for the left side. i checked for leaks and it is the only one giving me problems.

[pnbell]

i bought some that worked great from a site called "www.georgefixs.com" for $84.00 + $10 shipping; there are more available.

* Note: Loosen/Tighten the Vacuum Screws before you install them; Mine were torqued SO TIGHT that i spent an hour just trying to get them out and stripped every one!! If they weren't install on the bike already it would have be easier... So just a note.

http://www.georgefixs.com/servlet/the-7 ... AKE/Detail

Also when Removing/Installing one of the boots (the left middle one) its tight and you'll be pressing on one of the engine coolant pipes; the sealing o-ring on mine was so worn out that the act of pushing on the pipe cracked the seal and caused a leak... Consider yourself warned!