Hey guys! Just got my first bike ! Picked up a 1994 Yamaha FZR 600 for $900. There are 2 problems it has though. Im new to the two wheeled world so I was hoping you guys could help me out. 1) all electrical has stopped working (the bike does start), I've been told it could be wiring harness, a fuse, a short, basically I have to go through and check everything right?
2) it will only run on full choke. For this I have been told to clean/rebuild the carbs, or it could also be the fuel pump/filter. Does this sound right to you guys? Thanks in advance for helping me out.
Im somewhat new as well, but so far in my experience when electrical stops working that is exactly what i would do, go through the harness, check the fuses battery connection, battery itself etc. When you say all electrical do you mean nothing at all? No lights or anything?
When i first got mine the first thing i did was go through it and just replace the fuel filter, spark plugs, oil change, new cablesand all that, pretty much all the basics ya know. Maybe once you get the electrical going again try doing a few of these simple things as they may work and prove effective. Fuel filters are very easy to come by and are very cheap. Definitely take a look at the carbs as well.
Im sure all these other guys on here can tell you in much more detail how to go about troubleshooting but i hope this will help you out a bit and get you on the road!
Good Luck!
Nick
1992 Fzr 600 - Airtech Tail, K&N Twin Filters, Aftermarket Chopped Exhaust, Custom Blinkers (Lol)
CRG Bar End Mirror, R6 Front MC and Calipers
Soon To Come (aka wish-list) R6 Front Forks, YZF Rear Swingarm, Factory Pro Shift Kit, Stage 3 Jet Kit, and New Emulsion Tubes
ThrottleJunkie wrote:I thought it was all electrical, here is the post from C.L. which says that its just the rach and turn signals.
P.s. thanks for the help
Sorry i misread your first post, didnt realize the bike does start haha. Did you mean to post the craigslist link?
1992 Fzr 600 - Airtech Tail, K&N Twin Filters, Aftermarket Chopped Exhaust, Custom Blinkers (Lol)
CRG Bar End Mirror, R6 Front MC and Calipers
Soon To Come (aka wish-list) R6 Front Forks, YZF Rear Swingarm, Factory Pro Shift Kit, Stage 3 Jet Kit, and New Emulsion Tubes
ThrottleJunkie wrote:it will only run on full choke. For this I have been told to clean/rebuild the carbs, or it could also be the fuel pump/filter. Does this sound right to you guys? Thanks in advance for helping me out.
If you can get it to run, then grab a can of SeaFoam from your local automotive store or Wal-Mart. That should certainly help.
ThrottleJunkie wrote:all electrical has stopped working (the bike does start), I've been told it could be wiring harness, a fuse, a short, basically I have to go through and check everything right?
Start with the fuses since they're the easier and should be the first items to go. If you have a fuse that keeps blowing after replacing, then you probably have a short.
ThrottleJunkie wrote:it will only run on full choke. For this I have been told to clean/rebuild the carbs, or it could also be the fuel pump/filter. Does this sound right to you guys? Thanks in advance for helping me out.
If you can get it to run, then grab a can of SeaFoam from your local automotive store or Wal-Mart. That should certainly help.
ThrottleJunkie wrote:all electrical has stopped working (the bike does start), I've been told it could be wiring harness, a fuse, a short, basically I have to go through and check everything right?
Start with the fuses since they're the easier and should be the first items to go. If you have a fuse that keeps blowing after replacing, then you probably have a short.
ThrottleJunkie wrote:it will only run on full choke. For this I have been told to clean/rebuild the carbs, or it could also be the fuel pump/filter. Does this sound right to you guys? Thanks in advance for helping me out.
If you can get it to run, then grab a can of SeaFoam from your local automotive store or Wal-Mart. That should certainly help.
ThrottleJunkie wrote:all electrical has stopped working (the bike does start), I've been told it could be wiring harness, a fuse, a short, basically I have to go through and check everything right?
Start with the fuses since they're the easier and should be the first items to go. If you have a fuse that keeps blowing after replacing, then you probably have a short.
Ok guys so now i am looking at getting a rebuild kit for the quad 32mm carbs and also looking at getting a jet kit (maybe a dynot one?). any ideas guys?
Also where would be the best place to buy a fuel pump? Would a 4 pin VRR work?
! Picked up a 1994 Yamaha FZR 600 for $900. There are 2 problems it has though. Im new to the two wheeled world so I was hoping you guys could help me out. 1) all electrical has stopped working (the bike does start), I've been told it could be wiring harness, a fuse, a short, basically I have to go through and check everything right?
