I can idle my new bike

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

I can idle my new bike

Post by thatkid »

And that's it. The moment I touch the throttle it dies. Suggestions on what to check first? I'll be tearing into the carbs later in the week, but is there anything else I can check?

On a side note, the gaskets above and below the head look new so I'm really hoping there are pistons in there.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
User avatar
haunter
2000+ Posts
2000+ Posts
Posts: 2266
Joined: Fri May 09, 2008 9:17 am
Location: Urbana, Il USA
Contact:

Re: I can idle my new bike

Post by haunter »

what is it idling at?

could be super clogged up carbs

leaky airbox or carb boots
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: I can idle my new bike

Post by thatkid »

haunter wrote:what is it idling at?

could be super clogged up carbs

leaky airbox or carb boots
The carb boots look brand spanking new...no cracks..nothing. It's running single K&N pods on each and it idles at about 500 without me messing with the idle cable. It does hunt though. My guess is gunky carbs but I was really hoping to not have to tear into them just yet.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Modified96
50+ Posts
50+ Posts
Posts: 68
Joined: Sun May 11, 2008 7:15 pm
Location: Stillwater, OK

Re: I can idle my new bike

Post by Modified96 »

That idle seems pretty low.

Really dirty carbs, way to much airflow with incorrect jets or timing. I bet the carbs just need to be cleaned and possibly check the floats.
"There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." - Fear and Loathing
User avatar
haunter
2000+ Posts
2000+ Posts
Posts: 2266
Joined: Fri May 09, 2008 9:17 am
Location: Urbana, Il USA
Contact:

Re: I can idle my new bike

Post by haunter »

thats very low try and bring it up to 1000-1200
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: I can idle my new bike

Post by megaloxana »

Yeah that idle is extremely low for pods. I have my idle set to about 1200rpm. Does it still die once you turn the choke up?
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: I can idle my new bike

Post by thatkid »

megaloxana wrote:Yeah that idle is extremely low for pods. I have my idle set to about 1200rpm. Does it still die once you turn the choke up?

Yeah I needed chose to start it and about 6-7 times it started, revved up, then died. Finally got it to stay running but no ability to touch the throttle. I went out and bought the Gunk carb dunk system thing and cleaned the crap out of the carbs. They were pretty bad and the needles had some serious crap on them. One of the diaphragms was a pain to get to slide too. I'll hopefully get them put back together tomorrow and see if I can run it. The emulsion tubes looked fine so that's a plus. The cases were missing some screws so I'll need to get some and the guy did not do the best job of drilling out the brass plugs for the mixtures screws so I'll probably have to fix that too.

If that fixes it I'll be able to go for a spin on it around the neighborhood and see how she handles.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
User avatar
PIMPMYFZR
1000+ Posts
1000+ Posts
Posts: 1282
Joined: Wed May 14, 2008 8:18 am

Re: I can idle my new bike

Post by PIMPMYFZR »

What is it suppose to idle at ?is there a set idle or i would guess they all differ from stock to stage10 . IDK
Image
2002 R1 9k miles , Hotbodies undertail , Chopped Hindle Hi Mount , Solo Seat cowl,Frame sliders, little yellow yamaha wheel stickers .hehe
94' 600RR SOLD**
hid xenon
airtek solo tail
time for a 1000
R.I.P DaD 2/17/09 Your in my <3 always
Dr Rockso
Level 1.5
Level 1.5
Posts: 165
Joined: Sat May 10, 2008 10:15 am
Location: Fairfax , VA
Contact:

Re: I can idle my new bike

Post by Dr Rockso »

mine idles happily at 1100 , and i'm pretty sure thats what the manual calls for too
Image
Got busted plastics ??? go here : viewtopic.php?f=8&t=209
User avatar
YAM93
1000+ Posts
1000+ Posts
Posts: 1019
Joined: Sat May 17, 2008 8:19 pm
Location: Maryland, USA

Re: I can idle my new bike

Post by YAM93 »

I thought you were going to use that new bike for parts ? Are you planning on making it a legal running bike again and selling it ?

(EDIT: Don't answer that, i just read your other thread where you explained it already) Sounds like a good plan to me. How is that little 80cc chopper coming along ?

Sorry I've been to bike night again. Fargin' squid festival, I didn't hang around long. 954RR likes to BREATHE. I did a nice slingshot maneuver. God damn she's fast! (you know the old slingshot maneuver..... 2 staggered cars + 1 super-squid, hahahahaha)(it must be catching, or I'm really getting pissy after not having jumped the MX bike in a month)
screwy

-Lunatic Fringe
:-D
Image
" several meat-eaters lay in vomit, too weak to move..."
Post Reply