my first fzr 600
Moderators: Site Director, FZR Forum Moderators
- kilika2
- 1000+ Posts

- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: my first fzr 600
Mine will only click once if the line is full already, sometimes overnight the filter will run all the gas into the pump and then the pump will run for about 3 seconds to fill my filter back up. I did have a problem where the filter wasn't keeping what I thought was enough fuel in the line, so I checked and everything was clear but I relocated my filter to get my gravity to help the pump. However this doesn't help with your no spark. I'm glad things worked out here, I wanted to write earlier that I thought things just got confused about which wires you guys were talking about. But I didn't want to impose on your thread and make things worse.
But, by far Mawler is one of (if not the) best on electrical. I'm going to include a vr wiki file that you should probably print
out, I have 3 copies and use it all the time.
http://fzronline.com/wiki/doku.php?id=v ... flow_chart vr flow chart.
http://commline.com/FZR/600/MANUAL/ I don't know if this link will work, let me know and I will get it to you another way.
But you guys are on the chapter 8 part 1. About page 14 or 15 in the pdf. I'm a visual person so I like to see all this stuff.
Chris.
good luck.
But, by far Mawler is one of (if not the) best on electrical. I'm going to include a vr wiki file that you should probably print
out, I have 3 copies and use it all the time.
http://fzronline.com/wiki/doku.php?id=v ... flow_chart vr flow chart.
http://commline.com/FZR/600/MANUAL/ I don't know if this link will work, let me know and I will get it to you another way.
But you guys are on the chapter 8 part 1. About page 14 or 15 in the pdf. I'm a visual person so I like to see all this stuff.
Chris.
good luck.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
-
loolagigi
Re: my first fzr 600
ok my buddy came over and he checked a few things....my coils are getting power, but my 3 white stator wires have none. also, on my vr plug, there is a burnt mark, but it still reads hot. he is thinking either the stator, or the vr.
- kilika2
- 1000+ Posts

- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: my first fzr 600
You have a pic of the burnt mark?
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
-
loolagigi
Re: my first fzr 600
here it is....the red wire for the vr....also the three white wires were corroted where they plug into the stator wires.

- kilika2
- 1000+ Posts

- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: my first fzr 600
Yep, I would replace that plug. Even if it's not your problem. Also it looks like you have the old style VR. Did you get a new r6 one yet. I can't remember off the top of my head.
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
-
loolagigi
Re: my first fzr 600
its in the mail.......patiently waiting. also, i am crossing my fingers the new vr will get me spark. if not, im going to grab that tci for 50 bucks. AND IF THATS NOT IT I AM GOING TO CRY!!!!kilika2 wrote:Yep, I would replace that plug. Even if it's not your problem. Also it looks like you have the old style VR. Did you get a new r6 one yet. I can't remember off the top of my head.
Chris.
-
loolagigi
Re: my first fzr 600
i havnt seen any ideas from ya man. all you gatta do is suggest....im all ears.mawler wrote:OK Im done here. I did try
-
thatkid
Re: my first fzr 600
You could go back and Ask on the archives, wait..... you already haveloolagigi wrote:i havnt seen any ideas from ya man. all you gatta do is suggest....im all ears.mawler wrote:OK Im done here. I did try
http://www.fzrarchives.com/ipb/index.ph ... 1728&st=30
-
loolagigi
Re: my first fzr 600
thats the only place i get a sophisticated answer.mawler wrote:You could go back and Ask on the archives, wait..... you already haveloolagigi wrote:i havnt seen any ideas from ya man. all you gatta do is suggest....im all ears.mawler wrote:OK Im done here. I did try
http://www.fzrarchives.com/ipb/index.ph ... 1728&st=30
-
yamaha_george
- 5000+ Posts

- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: my first fzr 600
Loo,loolagigi wrote:Thats the only place i get a sophisticated answer.
Cool, I hope its the right one because you seem very antagonistic ( to the people trying to help you on this Forum) for someone seeking the answers.
By so being, have probably put off a number of major contributors here to answering any further of your questions you may have in the future.
- fzrbrandon
- Level 7.5

- Posts: 762
- Joined: Mon Oct 06, 2008 3:21 pm
- Location: North Hollywood, CA
- Contact:
Re: my first fzr 600
How exactly does this forum sucK??? You had a guy (Mawler) give you WAAAAY more of his time, energy, and expertise than I would ever HOPE to get and that's how you thank him?
92 FZR600 - 3EN2 400 swingarm, Micron, DynoJet, Factory Pro, K&N, R6 shock, RT springs/emulators, R6 MC, Galfer, YZF calipers, Vortex, RK, YZF/R6 VR/R, Vortex, Zero Gravity
90 FZR400 - Sharkskinz, D&D, Sudco, DynoJet, Factory Pro, Ohlins, RT springs/emulators, JEM Machine, Woodcraft, NRC, Galfer, Vortex, RK, YZF/R6 VR/R, Vortex, Lockhart Phillips
89 FZR600 - Vance & Hines, DynoJet, Zero Gravity - sold in '91
http://www.fzrbrandon.com
!!! 400 & 600 Parts For Sale !!! viewtopic.php?f=18&t=9971
- ragedigital
- 4000+ Posts

- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: my first fzr 600
Some people are just not mechanically inclined and need to have their hands held during the entire process.fzrbrandon wrote:How exactly does this forum sucK???
It's funny how the Archives users agreed with Mawler, but this clown is too blind to notice.
"loolagigi" can work through his problems at the Archives... I've deactivated his account here.
Thanks for joining and participating in the most "active" FZR Community on the internet!
-
yamaha_george
- 5000+ Posts

- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: my first fzr 600
ragedigital wrote:Some people are just not mechanically inclined and need to have their hands held during the entire process.fzrbrandon wrote:How exactly does this forum sucK???
It's funny how the Archives users agreed with Mawler, but this clown is too blind to notice.
"loolagigi" can work through his problems at the Archives... I've deactivated his account here.
THANK YOU RD

