a number of guys on another list have used these with good results :-
http://www.ignitech.cz/english/aindex.htm
4 cylinder version about 200USD with mapping program
Programable ignitions
Moderators: Site Director, FZR Forum Moderators
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Programable ignitions
hi,
a number of guys on another list have used these with good results :-
http://www.ignitech.cz/english/aindex.htm
4 cylinder version about 200USD with mapping program
a number of guys on another list have used these with good results :-
http://www.ignitech.cz/english/aindex.htm
4 cylinder version about 200USD with mapping program
Re: Programable ignitions
I've got one of these in my fzr400/660 these things run circles around what the Vance and Hines power packs can do. These have almost infinite adjustments that can be made to the timing plus there's a few other functions that the power pack doesn't even have (TPS, igntion kill for full throttle shifts, shift light function, rev limit can be set at whatever you like ). The last Vance and Hines power pack, which I'm guessing would be 15yrs old, that was on ebay sold for over $200USD!
fzr660/400: fzr400 3en1 frame, 3en2 swinger, custom single seat subframe, fzr660 motor conversion, APE adjustable cam gears, full D&D 4-2-1 exhaust, falicon clutch basket, ignitech ignition, R6 front end with tz250 wheel, ohlins shock, storz steering damper, tzr250 rear wheel.
weighs 166kg wet (25kg lighter than my stock fzr600).
weighs 166kg wet (25kg lighter than my stock fzr600).
-
ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Programable ignitions
Were the instruction clear? Do you keep any part of your stock CDI?
Thanks for joining and participating in the most "active" FZR Community on the internet!
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Programable ignitions
Check out the VR they have..beefy!
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: Programable ignitions
MLmegaloxana wrote:Check out the VR they have..beefy!
I Gather all their stuff is agricultural industry strength designed by bikers of the URAL style machines to be tough & easy to use.
The one thing you have to worry about is having a laptop for easy tuning else the unit has to come off the bike.
So far every one raves about them lets hope fame does not dilute that quality