FZR/YZF engine interchangeability for a rebuild
Moderators: Site Director, FZR Forum Moderators
-
- Level 4.0
- Posts: 418
- Joined: Sun May 10, 2009 8:23 am
- Location: Milton, Ontario, Canada
Re: FZR/YZF engine interchangeability for a rebuild
Seeing as I have a 683cc (661 + 1mm overbore). I can tell you it's quite noticeable. Especially the torque. It has great pull all the way through the rev range. More notably it more forgiving of being in a higher gear and still providing decent pick up.
-
- 50+ Posts
- Posts: 71
- Joined: Sun Apr 12, 2009 7:52 pm
- Location: St.Louis Missori
Re: FZR/YZF engine interchangeability for a rebuild
anyone know how to mount the bearing and collar on the output shaft of the transmission. it's an interference fit and i lack i hydraulics press to put it on, any ideas?
Re: FZR/YZF engine interchangeability for a rebuild
There are a couple of us that are interested in this mod on the YZF website. I can't seem to find the aforementioned link in the WIKI section. Do you have any specs on this mod or a link? ThanksFreestyle72 wrote:Seeing as I have a 683cc (661 + 1mm overbore). I can tell you it's quite noticeable. Especially the torque. It has great pull all the way through the rev range. More notably it more forgiving of being in a higher gear and still providing decent pick up.
Cris
-
- 50+ Posts
- Posts: 71
- Joined: Sun Apr 12, 2009 7:52 pm
- Location: St.Louis Missori
Re: FZR/YZF engine interchangeability for a rebuild
crishard which site for yzf's are you a member of? I've got some 4TV parts to get rid of.