what goes here in the fairing
Moderators: Site Director, FZR Forum Moderators
what goes here in the fairing
On the left side this fairing mount is bolted to the choke but what happens on the right is there a spacer of sorts in there or does in mount directly to the frame?
fzr660/400: fzr400 3en1 frame, 3en2 swinger, custom single seat subframe, fzr660 motor conversion, APE adjustable cam gears, full D&D 4-2-1 exhaust, falicon clutch basket, ignitech ignition, R6 front end with tz250 wheel, ohlins shock, storz steering damper, tzr250 rear wheel.
weighs 166kg wet (25kg lighter than my stock fzr600).
weighs 166kg wet (25kg lighter than my stock fzr600).
Re: what goes here in the fairing
Check an online parts fische source there is a part called an air scoop that I believe goes in there. One on each side. Altghough I think that is a liter bike or a 750 in the photo and my comments is intended for a 600 FWIW.
Re: what goes here in the fairing
on the genesis 1k's there was a lil spacer there
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: what goes here in the fairing
Yea I though one of those air scoops might mount there, looks like I'll just space it out. It's actually a 3en2 fzr400 which has the same lowers as the 600.
fzr660/400: fzr400 3en1 frame, 3en2 swinger, custom single seat subframe, fzr660 motor conversion, APE adjustable cam gears, full D&D 4-2-1 exhaust, falicon clutch basket, ignitech ignition, R6 front end with tz250 wheel, ohlins shock, storz steering damper, tzr250 rear wheel.
weighs 166kg wet (25kg lighter than my stock fzr600).
weighs 166kg wet (25kg lighter than my stock fzr600).
Re: what goes here in the fairing
hi all,
i got a 600 genesis (1990). on the right-hand side there is a little u-shaped metal bit which is attached to the frame from one end and the other end attaches to the fairing.
Kind of like this:
_ _
| |
| *
| |
| |
--------
* = hole where the bolt holding the fairing goes.
Frame on the left. Obviously not in scale or anything like that. I hope you get the idea.
i got a 600 genesis (1990). on the right-hand side there is a little u-shaped metal bit which is attached to the frame from one end and the other end attaches to the fairing.
Kind of like this:
_ _
| |
| *
| |
| |
--------
* = hole where the bolt holding the fairing goes.
Frame on the left. Obviously not in scale or anything like that. I hope you get the idea.
Re: what goes here in the fairing
ok, that drawing attempt didn't work out at all!
hmm... i drew quickly a .jpg file... how does one attach it here?
hmm... i drew quickly a .jpg file... how does one attach it here?