does the fzr600 have a tag light??
or am I going to have to wire up my own tag light system on the bike?
I guess I can wire it threw the with the guage lights...
fzr600 Tag light?
Moderators: Site Director, FZR Forum Moderators
Re: fzr600 Tag light?
mines in my brake light not for long tho
Re: fzr600 Tag light?
The bottom of the stock tail light is clear so light shines down on the plate. I suggest adding a relay if add the light otherwise you'll pop fuses.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: fzr600 Tag light?
what if I wire it into my guages and go up one size fuse on guage fuse?sweekster wrote:The bottom of the stock tail light is clear so light shines down on the plate. I suggest adding a relay if add the light otherwise you'll pop fuses.
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: fzr600 Tag light?
I just added an LED to the daylight wire of the rear tailight - should be blue. Add the appropriate resistor.
You can see it in this image - it is a small led inside of a chrome led holder:
You can see it in this image - it is a small led inside of a chrome led holder:
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: fzr600 Tag light?
Wire it into the blue running light wire like it should be. A led doesnt draw much, so try it with just the LED first. If you pop the fuse, add a relay. Dont make it more complicated than it needs to be.shredex wrote:what if I wire it into my guages and go up one size fuse on guage fuse?sweekster wrote:The bottom of the stock tail light is clear so light shines down on the plate. I suggest adding a relay if add the light otherwise you'll pop fuses.