frame slider application...
Moderators: Site Director, FZR Forum Moderators
-
90fzr600nm
- Site Newbie
- Posts: 29
- Joined: Sat Nov 01, 2008 9:40 pm
frame slider application...
i am looking ot install some frame sliders in case of an accident and i was wondering if someone knows where i can get some... or is it going to be a "universal" type that i have to rig up to work... i will also buy a pair of slightly used if someone has a set... thanks...
Re: frame slider application...
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
-
the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: frame slider application...
Pics are available in the thread above...kikepiz wrote:WE need pics
Be sure to check out the whole thread. There are two different types of slider mounts proposed, both of which will theoretically work better than nothing but niether have actually been constructed or tested yet. I'm working on my design, but it'll probably be another couple of months before I'll have it done (gotta sort the suspension first).
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Re: frame slider application...
I was thinking that when TK gets done making his crash bars you could mount fairings on and drill through the upper part and mount the slider on somehow.
2002 Yamaha R6-----2003 Yamaha R6
