R6 Header Swap??
Moderators: Site Director, FZR Forum Moderators
-
kawibunga90
- Site Newbie
- Posts: 14
- Joined: Sat Aug 16, 2008 7:13 pm
- Location: Tulsa Ok
R6 Header Swap??
Saw a mention earlier bout using an R6 header, has anyone done this?? If so what years and how much modification was needed?
95 FZR600
Rewired to nonexup removed servo, cables and valve.
Rebuilt Carbs..About 3 times..
Rebuilt Front End, Added 1/2" to spacers w/15w oil.
Replaced Front Wheel, Fresh Powdercoat,Bearings,Tire.
R6 Calipers,Lines and m/c.
09' R6 rear shock.
Rewired to nonexup removed servo, cables and valve.
Rebuilt Carbs..About 3 times..
Rebuilt Front End, Added 1/2" to spacers w/15w oil.
Replaced Front Wheel, Fresh Powdercoat,Bearings,Tire.
R6 Calipers,Lines and m/c.
09' R6 rear shock.
-
ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: R6 Header Swap??
Thanks for joining and participating in the most "active" FZR Community on the internet!
-
deathcomesarippin
- Site Newbie
- Posts: 40
- Joined: Mon Dec 01, 2008 6:20 pm
- Location: gods waiting room (florida)
Re: R6 Header Swap??
cool thats a nice write up on it, im actually doing this tomorrow for a project in my welding class ill post pics and stuff when im done
modded air box,
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
Re: R6 Header Swap??
deathcomesarippin wrote:cool thats a nice write up on it, im actually doing this tomorrow for a project in my welding class ill post pics and stuff when im done
For sure take lots of pics. Hope all is good. Have fun!
2002 Yamaha R6-----2003 Yamaha R6
