List your carb setup

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
davephipps
50+ Posts
50+ Posts
Posts: 60
Joined: Mon May 12, 2008 10:50 am
Location: Bloomington Indiana, US

List your carb setup

Post by davephipps »

I've seen quite a few posts on this forum asking for Carb help. I was thinking that it might be useful to list our working carb setups.
I'll start. Mines not perfect. I'm still dialing it in this weekend.
FZR600 RA
D&D full exhaust with no baffle(WAY LOUD)
Stock airbox.
Factory Pro springs.
Factory Pro needles clip position #2.
Float Height 24 mm.
mixture screws 2.25 turns out.
Stock jets 107.5 main

This setup seems just a touch lean at 1/8 to 1/2 throttle . I'll edit the post as I get it closer to perfect.
Remember all who are working on your carbs, record every change so you don't have to repeat anything.

Factory pro pages
CV carb tuning
http://www.factorypro.com/tech_tuning_p ... gines.html
A good explanation of adjusting floats w/pics
http://www.factorypro.com/tech_tuning_p ... edure.html
MIkuni Carb explanation
http://www.iwt.com.au/mikunicarb.htm

Happy tuning guys
:cheers:
Last edited by davephipps on Sat Aug 23, 2008 12:24 am, edited 1 time in total.
FZR600 1992
CB550F 1974
GL1000 1978
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: List your carb setup

Post by megaloxana »

I wonder if we can get factory pro's database posted on here? They should have a good number of setups in their database for the fzr.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
haro504
Level 7.5
Level 7.5
Posts: 768
Joined: Fri Aug 08, 2008 5:42 pm
Location: winchendon, ma

Re: List your carb setup

Post by haro504 »

i ahhhhhhh have 4 yep 4 carbs
ones life is the way it is only because you allow it make it happen.
i poop my pants i poop my pants
Top
User avatar
YAM93
1000+ Posts
1000+ Posts
Posts: 1019
Joined: Sat May 17, 2008 8:19 pm
Location: Maryland, USA

Re: List your carb setup

Post by YAM93 »

^^^
dude is totally cracking me up tonight...

anyway, yeah, i DEFINITELY got 4, but i have no idea of their settings other than all the needles are at the 3rd position and they are by DYNOJET. I had a mechanic clean and tune them January of 2007 but don't know what he set the floats at or the mixture screws.

Maybe i'm going nuts but i thought there was a "carb sticky" or wiki for this kind of stuff anyway. i shall look around.
:twisted: :rocker: :drumroll
Image
" several meat-eaters lay in vomit, too weak to move..."
Top
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: List your carb setup

Post by ragedigital »

Bike: 1996 FZR600 (EXUP - all EXUP components removed)
Intake: Stock Airbox w/ K&N Filter (no ram air tubes attached to frame)
Exhaust: Full V&H Supersport Exhaust

Carb Mods:
- Factory Pro Emulsion Tubes
- DynoJet Jet Kit

Carb Settings:
- Main: 126 (DynoJet)
- Starter: 52.5 (Stock)
- Clip Position: #3
- Float Level: 22.5mm
- Mixture Screws: Varies. Got them as close as possible with a IR Temp Gun taking header measurements.

Notes:
Did not drill out slides like DJ recommends.
I run 87 octane gasoline.
Not the best all-around town settings, but it was a Track Day beast! Pulled real hard at 1/4 to WOT.
Top
User avatar
slayermd
Level 5.0
Level 5.0
Posts: 521
Joined: Sat Aug 09, 2008 3:20 pm
Location: Westminster Colorado
Contact:
Contact slayermd

Re: List your carb setup

Post by slayermd »

Still stock :(
Top
davephipps
50+ Posts
50+ Posts
Posts: 60
Joined: Mon May 12, 2008 10:50 am
Location: Bloomington Indiana, US

Re: List your carb setup

Post by davephipps »

I'm going to record all of these and see if ragedigital will add them to the wiki. Please post more guys, I need all the info I can get.

BTW slayermd are you in the seattle area, and working in game development?
FZR600 1992
CB550F 1974
GL1000 1978
Top
User avatar
maverick
50+ Posts
50+ Posts
Posts: 57
Joined: Sat Aug 02, 2008 12:25 am

Re: List your carb setup

Post by maverick »

i'm still dialing it in but as of now i have the cold air intake with a dynojet stage three jet kit. 128 mains with 24mm float height and needles on clip 2. i think 3 turns out for idle air screw.
Top
fadlan12
100+ Posts
100+ Posts
Posts: 109
Joined: Sun Jul 13, 2008 7:32 am

Re: List your carb setup

Post by fadlan12 »

Currently bike is stock, V&H ehxaust and paper filter (soon a K&N).

My carbs settings:
22mm floats
3.5 a/f
synched
setting 3 (from the top) on factory pro needles
new emulsion tubes
factory pro springs
stock jets 7.5,5.2 etc

Running super unleaded most of the time.
Last edited by fadlan12 on Sun Aug 24, 2008 3:55 pm, edited 1 time in total.
Top
User avatar
slayermd
Level 5.0
Level 5.0
Posts: 521
Joined: Sat Aug 09, 2008 3:20 pm
Location: Westminster Colorado
Contact:
Contact slayermd

Re: List your carb setup

Post by slayermd »

davephipps wrote:I'm going to record all of these and see if ragedigital will add them to the wiki. Please post more guys, I need all the info I can get.

BTW slayermd are you in the seattle area, and working in game development?

I am not in the Seatle area. Im in good ole' Denver. And I wish I was in game development, that would be sweet!
Top
fadlan12
100+ Posts
100+ Posts
Posts: 109
Joined: Sun Jul 13, 2008 7:32 am

Re: List your carb setup

Post by fadlan12 »

YAM93 wrote:^^^
dude is totally cracking me up tonight...

anyway, yeah, i DEFINITELY got 4, but i have no idea of their settings other than all the needles are at the 3rd position and they are by DYNOJET. I had a mechanic clean and tune them January of 2007 but don't know what he set the floats at or the mixture screws.

Maybe i'm going nuts but i thought there was a "carb sticky" or wiki for this kind of stuff anyway. i shall look around.
:twisted: :rocker: :drumroll
think thats in the archives
Top
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: List your carb setup

Post by sweekster »

Carb page on the WIKI
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image

THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Top
fadlan12
100+ Posts
100+ Posts
Posts: 109
Joined: Sun Jul 13, 2008 7:32 am

Re: List your carb setup

Post by fadlan12 »

But none of these details are there, I had suggested this a few weeks ago when you guys posted about it.

viewtopic.php?f=32&t=1098
Top
davephipps
50+ Posts
50+ Posts
Posts: 60
Joined: Mon May 12, 2008 10:50 am
Location: Bloomington Indiana, US

Re: List your carb setup

Post by davephipps »

C'mon people. It's hard to create a reference for people without a good sampling. I know there are more people out there with carbs on thir bikes. List them and the FZR gods will smile down upon you and grant you 10 more HP 8-)
Once we have enough perhaps Rage can add the refs to the wiki.
FZR600 1992
CB550F 1974
GL1000 1978
Top
Post Reply

Return to “FZR600”