Greetings from downunder

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
Rayman
Site Newbie
Posts: 6
Joined: Thu Sep 22, 2016 12:32 am
Contact:

Greetings from downunder

Post by Rayman »

Hi Guys / Gals (?)
picked up an incomplete 91 FZR600 the other week as a project -
missing some panels ( sorted now) and one of the Previous owners took off the clutch cover and lost it and all of the parts underneath !

Picked up a "was running" engine to drop in from a local wrecker - but intending to collect the missing parts on the other engine to complete that as well.
he she is in the shed - as you can see Im used to working with v4 hondas - so probably a masochist ... screwy

Regards
Rayman
Attachments
SAVE_2.jpg
(84.52 KiB) Downloaded 3966 times
Ignition Modules and other stuff
www.rae-san.com


cx500A - grey - commuter (phantom) SOLD
cx500B+ - undertail exhaust - complete (Storm) SOLD
vf750f - complete but needs a repaint and rings
vf750s - complete - sold
vf750s - fiddler - vf1000f forks, ignition trail, 4into1, pods, clip ons, dual headlights etc
next cx - cx500 in 650 frame with undertail pipes and lots of changes - almost done
91 - fzr600 New project
buzzawak
Level 2.0
Level 2.0
Posts: 201
Joined: Wed Apr 29, 2009 4:09 am
Location: Newcastle, Australia

Re: Greetings from downunder

Post by buzzawak »

Welcome Rayman,
Where about in oz are you ? I am in Newcastle,nsw.
User avatar
Rayman
Site Newbie
Posts: 6
Joined: Thu Sep 22, 2016 12:32 am
Contact:

Re: Greetings from downunder

Post by Rayman »

Hi Mate - Im in Adelaide so not close ...

Regards
Rayman
Ignition Modules and other stuff
www.rae-san.com


cx500A - grey - commuter (phantom) SOLD
cx500B+ - undertail exhaust - complete (Storm) SOLD
vf750f - complete but needs a repaint and rings
vf750s - complete - sold
vf750s - fiddler - vf1000f forks, ignition trail, 4into1, pods, clip ons, dual headlights etc
next cx - cx500 in 650 frame with undertail pipes and lots of changes - almost done
91 - fzr600 New project
User avatar
Rayman
Site Newbie
Posts: 6
Joined: Thu Sep 22, 2016 12:32 am
Contact:

Re: Greetings from downunder

Post by Rayman »

finally got back to this starting In January -
just about there now - cleaning and rebuilding as I go -
hopefully engine in this coming weekend - then need to order a screen( dark) and chain and sort indicators.

paintwork is my web site promo that I completed a couple of weeks ago -

not the best colour rendition from the phone ....
weekend was complete rebuild of forks and calipers - ( pd valves and 0.83 springs)
mounting of instruments ( 91 bike - but 89 fairing), tubes ,bars etc.
fz1000 shock should arrive this week - will need to respring and reshim


Regards
Rayman
Attachments
webby.jpg
Ignition Modules and other stuff
www.rae-san.com


cx500A - grey - commuter (phantom) SOLD
cx500B+ - undertail exhaust - complete (Storm) SOLD
vf750f - complete but needs a repaint and rings
vf750s - complete - sold
vf750s - fiddler - vf1000f forks, ignition trail, 4into1, pods, clip ons, dual headlights etc
next cx - cx500 in 650 frame with undertail pipes and lots of changes - almost done
91 - fzr600 New project
User avatar
Rayman
Site Newbie
Posts: 6
Joined: Thu Sep 22, 2016 12:32 am
Contact:

Re: Greetings from downunder

Post by Rayman »

more bits have arrived -
engine in - tuned/synced the carbs (4 way digital vacuum gauge) and fixed some leaks -
few bits still to go on - chain, pegs, brake fluid ...
but otherwise nearly there.

was very bright sun so have fiddled picture back to somewhat near the correct colour.
IMG20180318170048.jpg
IMG20180318170034.jpg
Rayman

PS - yes the exhaust angle is wrong - its just on there loosely as I need to do a repair to the mounting flange yet...
Ignition Modules and other stuff
www.rae-san.com


cx500A - grey - commuter (phantom) SOLD
cx500B+ - undertail exhaust - complete (Storm) SOLD
vf750f - complete but needs a repaint and rings
vf750s - complete - sold
vf750s - fiddler - vf1000f forks, ignition trail, 4into1, pods, clip ons, dual headlights etc
next cx - cx500 in 650 frame with undertail pipes and lots of changes - almost done
91 - fzr600 New project
buzzawak
Level 2.0
Level 2.0
Posts: 201
Joined: Wed Apr 29, 2009 4:09 am
Location: Newcastle, Australia

Re: Greetings from downunder

Post by buzzawak »

Just do the exhaust so it is parallel to the line of the sub-frame. You see some bikes with the exhaust at 45% and it look like a erection.
User avatar
Rayman
Site Newbie
Posts: 6
Joined: Thu Sep 22, 2016 12:32 am
Contact:

Re: Greetings from downunder

Post by Rayman »

changed the decals to a bit less specific as putting her up for sale -
by back and neck and wrists are not tolerarant of the position any more - so I usually use the 1050 sprint.
oh the red is more red than the photos make it look - the phone camera shifted it towards orange

Rayman

anyway - photo for the record.
IMG20180810120647.jpg
IMG20180810120551.jpg
Ignition Modules and other stuff
www.rae-san.com


cx500A - grey - commuter (phantom) SOLD
cx500B+ - undertail exhaust - complete (Storm) SOLD
vf750f - complete but needs a repaint and rings
vf750s - complete - sold
vf750s - fiddler - vf1000f forks, ignition trail, 4into1, pods, clip ons, dual headlights etc
next cx - cx500 in 650 frame with undertail pipes and lots of changes - almost done
91 - fzr600 New project
Post Reply