hi i have a 1999 fzr600
1. are all brake master cylinder years interchangeable between all fzrs? also where can i buy some good braided front brake lines?
2. how can i remove the headlights from the front upper fairing stay
3. does anyboy have a 1999 fzr 600 front upper fairing stay and the front upper mirror stay? or ones that fit on a 1999 fzr 600?
4.how to remove CA emmisons actuator thing on the header /exhaust?
need some help with a few parts
Moderators: Site Director, FZR Forum Moderators
Re: need some help with a few parts
See your other thread for several answers. Please don't spam - ask in one spot.
1. Front master cyls are the same through all model years.
2. undo the 4 nuts holding it (and the upper cowling) in place. The studs are cast into the back of the cowl, and pass through the headlight shell.
4. Cut / tear it away; plug / crimp the brazed-in tubes.
1. Front master cyls are the same through all model years.
2. undo the 4 nuts holding it (and the upper cowling) in place. The studs are cast into the back of the cowl, and pass through the headlight shell.
4. Cut / tear it away; plug / crimp the brazed-in tubes.
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier