FZRSupport: the FZROnline Archive

Hello all,
I'm currently breaking an ex race 3en1 with 17" conversion.
i have a range of parts and various extra engine and some carb bits.
Headers have been sold but have frame and v5,engine (had clearances done) carbs, forks with progressive springs and oil for track, some good and some damaged repairable fairing and lots other bits, let me know if you need anything and i'll see if i got it!
UK postage only unless you really want to pay for it to the US!

looking for about £170 for the rear end - rim, caliper+hanger, spindles, spacers, sprocket carrier, swingarm bushed down for 3en1, dog bones to use 3en1 shock, all you need for the conversion except a tyre!

Other bits let me know!

Will put donation back to site for anything sold on here!

Cheers
Taggy

engine, carbs and frame gone now!
Got a set of of braided lines as well to add to the list.
cheers

lines and rear end gone now!
got bars and dark screen in goo nick as well!

Mate i am after a set of side panels both lower and upper , and possibly a head light cowl and the screen bracket which goes over the yoke, sorry to ask so rashly but any chance you have some of these parts or all im rebuilding the bike over winter but need to do my test anywayz like but want to get it built asap don't mind if fairings are ruff ? .


Cheers mate

Ben

sorry, all those bits have gone, it sounds like you have an older model than mine as my sides were one piece not two anyway!