FZRSupport: the FZROnline Archive

Bought a couple of weeks ago from Projection Racing. I stupidly bought the wrong length of lowering link, fitted them and then realised that my bike was too low (I was using them on a 1988 FZR600 whilst installing an R6 rear shock).

The lowering links are 20mm longer than the standard links. They are in near perfect condition, as I installed them and then took them off the bike straight away.

They were bought from here: http://www.projection-components.co.uk/ ... -977-p.asp

They are 155mm in length from centre hole to centre hole. The holes are 12mm in diameter.

I'm looking for £17.00 including postage to the UK.

Have you aske Projection if you can swap them for a handling charge, they're reasonable people

I haven't but I assumed that I couldn't swap them due to me actually fitting them to the bike, so they have a couple of very small scratches on them. I might drop them an email though. Although I have ordered new links from Projection and fitted them already.

I can see the marks, but they could be polished out. As this is mainly a usa site it's unlikely they'll move through here.

Back in the day I drew the plans for TGI Fridays in Stockport

No problem. I'll try them on eBay and see how that goes.

Ah excellent. Small world!

Thanks for the help.

If you need bones, I still supply any size in stainless and post worldwide at cost
I also sell on eBay under ID. stigsdump2000