FZR600 Projection Racing Lowering Suspension Links

[chris-seed]

Bought a couple of weeks ago from Projection Racing. I stupidly bought the wrong length of lowering link, fitted them and then realised that my bike was too low (I was using them on a 1988 FZR600 whilst installing an R6 rear shock).

The lowering links are 20mm longer than the standard links. They are in near perfect condition, as I installed them and then took them off the bike straight away.

They were bought from here: http://www.projection-components.co.uk/ ... -977-p.asp

They are 155mm in length from centre hole to centre hole. The holes are 12mm in diameter.

I'm looking for £17.00 including postage to the UK.

[Evilchicken0]

Have you aske Projection if you can swap them for a handling charge, they're reasonable people

[chris-seed]

I haven't but I assumed that I couldn't swap them due to me actually fitting them to the bike, so they have a couple of very small scratches on them. I might drop them an email though. Although I have ordered new links from Projection and fitted them already.

[Evilchicken0]

I can see the marks, but they could be polished out. As this is mainly a usa site it's unlikely they'll move through here.

Back in the day I drew the plans for TGI Fridays in Stockport

[chris-seed]

No problem. I'll try them on eBay and see how that goes.

Ah excellent. Small world!

Thanks for the help.

[Stig]

If you need bones, I still supply any size in stainless and post worldwide at cost
I also sell on eBay under ID. stigsdump2000