FZRSupport: the FZROnline Archive

Hi, I have a load of spares from an FZR 400 3TJ I bought. Starting with this exhaust which I'd like £100 for. Message me if you're interested or looking for anything else for this model. I will post everything up here eventually!

PM'd

Chris

If the wheels are viable, I could use a second set for my race 3TJ.

hi would u have the exup valve shaft in header pipes ??

Steve
steveoslater@hotmail.com

Steveoslater wrote:hi would u have the exup valve shaft in header pipes ??

Steve
steveoslater@hotmail.com

If the valve is the same as the one in the 1000cc then the thunderace and early R1 valves will fit. The R1 item will need the far stub end shortening to fit tho'

hope this helps, it may give you a wider field of search

Also try Ebay.de theres often items on there where the sellers will sell overseas and the price is good too

Sorry all, I didn't realise I only get an email if you PM me so haven't been checking my thread. I have left engine bits, carbs and panels.

What panels/colours do you have Michelle?

Chris

Ok, I have the rear side panels both sides, the front lower side panels both sides and two pairs of inserts (the bit where the reserve switch goes). I also have two incomplete 3TJ engines, regulator/rectifier SH569A-12, ecu/cdi 4DX-82305-00, an air box and a pair of the larger style indicators. I still have the exhaust too (no end can) but the studs are rusted in.

Photos too big to upload to the gallery so they are on Photobucket.com here: http://s1303.photobucket.com/user/miche ... t=3&page=1

I will add photos of the engines as soon as I can.

CDI unit arrived this morning

Thank you!

Chris

SouthendChris wrote:CDI unit arrived this morning

Thank you!

Chris

Excellent, thanks for letting me know.

Do you happen to have the 3TJ swingarm? i gotta have one, . I live in the U.S.A but i will pay shipping.

Hi there, I don't have one off this particular bike but our experience with selling this went so well we've set up in business full time as International Bike Spares (www.internationalbikespares.com) and I can source one for you in the UK. There's a white powder coated one available which is in great condition which I can do for £90 as is or can arrange for it to be stripped and powder coated in a different colour (white's not everybody's cup of tea!). I would imagine the postage would be around £50 but i'll get a quote for you if you're interested.
Thanks for the contact.
Ps everyone who likes us on Facebook gets 5% off!

Fairings?????

I've got some