FZR600 3HE engine parts to swap FZR400 parts wanted

[SouthendChris]

Hello.

I have a few FZR600 3HE engine parts for swap. I am after FZR400 3TJ parts really and am prepared to do straight swaps as this stuff is just blocking up my workspace.

What I have:

Oil pump - whole unit
Sump
Crank with rotor on one end and starter gear on the other
4 x 3HE Conrods
3HE cylinder I have got 3 (!?!) pistons. They have 1.0 stamped on the tops - from two strokes I remember this meant 1.0mm oversize but I didnt think oversize FZR pistons were available?????
Camshafts with camchain sprockets on them
Gearbox parts - lots but don't know If I have a whole one.
Completly bare/stripped cylinder head - no valves or anything fitted other than spark plugs and old carb inlet stubs.
Set of paired engine casings with gear selector forks in and gear drum

What I need:

FZR400 3TJ - the wiring that goes between battery and starter solenoid - it also has a little take off wire that goes to the Main fuse.
FZR400 3TJ - front brake lever
W.H.Y?

Dont want to take cash for these parts - would rather swap for 400 parts. If you really need one of these bits and you can collect then come take it!

Chris

[taggy]

there were fzr oversized pistons made for the 400's so don't see why they wouldn't for the 600! i may have a starter solenoid and associated wiringhiding in the shed though i don't need any 600 bits! will have to look tomorrow when i am able to get into the shed. might have a lever, but i think it's a bit scratched iirc!

[SouthendChris]

Thanks for looking would really apreciate the wiring part. I just want to start the bike I have before stripping it down, or at least get it cranking over and not make any rumbling noises!!

Chris

[taggy]

ive got a solenoid, the wiring it has is two short red wires one for battery and another with a connector. and a short thinner wire that attaches next to the red, sorry it's a bit of a rubbish description, i'm having trouble getting a picture onto the computer! (something to do with a three year old and a connecting cable!)

[SouthendChris]

That is exactly the piece of wiring I am after I am not after the solenoid, that is still on my bike. If you want I can paypal you some funds if you like? PM me your paypal email addy and I will reply with my postal address. Thanks for taking the time to look

Chris