FZRSupport: the FZROnline Archive

I need a picture like this:



But for a 400, could anyone help me?

BMiller should be able to help you out with that request

I can get you one in the next day or two, but not right now...

Are you looking for something specific? I've got a pretty good memory of what mine looks like under there if you've got a question about where something goes.

I happen to have mine off.It's far from stock tho.It did look more like your pic once apon a time.The thing thats mostly different is the location of the coils

FasterThanUr wrote:I happen to have mine off.It's far from stock tho.It did look more like your pic once apon a time.The thing thats mostly different is the location of the coils

I want to get rid of the radiator filler neck so I can use the fzr400 air box I have to fit under the yzf600 tank, but I f read your sig right I need a 05 r6 radiator to do that, thanks for the pic

I got a r6 radiator on its way One more bracket I can cut off.

Yeah I have the 05 rad.I just used two long bolts"See Red Arrows in pic"And bolted that to the top of the rad.




And I did just have the bottom bailing wired to the header,but when I did the r6 headders I put in a bracket



It works great.I was able to use both fans without them rubbing,but it was vary close

Genesis wrote:I need a picture like this:



But for a 400, could anyone help me?

whats that thing coming out of the frame where the rust is with the holes??
this does not exist on my bike

shredex wrote:whats that thing coming out of the frame where the rust is with the holes??
this does not exist on my bike

I was curious about that too, my 400 doesn't have it either.

ashtong63 wrote:

shredex wrote:whats that thing coming out of the frame where the rust is with the holes??
this does not exist on my bike

I was curious about that too, my 400 doesn't have it either.

That is because I have a 600 it holds the front of the air box

Don't know if you still need it but here's what my '90 400 looks like.



I have since run the wiring harness up through the frame spar so I could put on the airbox. Boy did that suck...

Ashton wrote:I was curious about that too, my 400 doesn't have it either.

Obviously I'm an idiot, I do have that but it's bolted on and is a different color.

Thanks, I am trying to figure why the 400 air box sits further forward than the 600 air box. that 400 engine must sit further back in the frame.

FasterThanUr wrote:I happen to have mine off.It's far from stock tho.It did look more like your pic once apon a time.The thing thats mostly different is the location of the coils

Did you just plumb you FZR inlet to the lower right corner outlet? and vice-versa? the FZR outlet to the upper left r6 inlet?

FasterThanUr wrote:Yeah I have the 05 rad.I just used two long bolts"See Red Arrows in pic"And bolted that to the top of the rad.




And I did just have the bottom bailing wired to the header,but when I did the r6 headders I put in a bracket



It works great.I was able to use both fans without them rubbing,but it was vary close

dude, is it possible to mount the r6 rad how you have it on a 600 frame? NICE JOB

mxryder21 wrote:dude, is it possible to mount the r6 rad how you have it on a 600 frame? NICE JOB

I am working on a bracket with modking right now I will keep you posted.