Need some photographic assistance...

FZR400 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
bweight
Level 4.0
Level 4.0
Posts: 421
Joined: Wed May 07, 2008 4:03 pm
Location: Sudbury, ON, Canada

Need some photographic assistance...

Post by bweight »

Hey guys.. for those like me who still have a 400, I need a pic of the upper birdcage mounted on the bike. If someone could do this for me, it would be GREATLY appreciated. Mine's bent and I'm not sure exactly which way everything lined up prior to my wreck.

What I would like is a few photos taken. One from straight on, with or without the headlights in place. And one from either side of the birdcage just so I can tell which pieces I need to re-align.

Again, if someone could do this for me, I might be able to get things back to looking the way they were before, and I can re-weld the broken pieces.

Thanks in advance.

Brian
89 FZR 400
Custom Paintjob
600 plastics.
06 - R6 Shock
FZR600 Motor
Polished Frame & Engine Covers

Soon to be:
Broke........

Image
FZROnline.com Decals. Get yours Now!!!
Yellowducky
Site Newbie
Posts: 2
Joined: Tue May 20, 2008 7:13 pm
Location: Toronto, Ontario, Canada

Re: Need some photographic assistance...

Post by Yellowducky »

My bike is at the shop finishing a F2 rear swap, I'll try to go there this week or weekend to snap some pics for ya.
The more the merrier!
bweight
Level 4.0
Level 4.0
Posts: 421
Joined: Wed May 07, 2008 4:03 pm
Location: Sudbury, ON, Canada

Re: Need some photographic assistance...

Post by bweight »

Thanks.. I'm still dealing with someone on Craigslist for a birdcage off of a 600.. If all goes well I hope I'll have it in by next week sometime..
89 FZR 400
Custom Paintjob
600 plastics.
06 - R6 Shock
FZR600 Motor
Polished Frame & Engine Covers

Soon to be:
Broke........

Image
FZROnline.com Decals. Get yours Now!!!
Post Reply