ok, you are gonna hate me for this.....but I have 88 fzr400 frorks and triples on my 80 ducati pantah. I'm tryin to find some brake calipers for the front. I also need the axles and spacer for the front. does anyone have these parts? also, is the any other calipers that will fit, maybe better calipers?
thanks!
FZR 400 BRAKES!!!
Moderators: Site Director, FZR Forum Moderators
Re: FZR 400 BRAKES!!!
I think R6 '99-'02 calipers will fit well on it.
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
Re: FZR 400 BRAKES!!!
I know it's kind of an old thread, but...
'88 FZR400 front calipers are the dual cylinder variety, not four, like the later FZRs, thus YZF/R6 calipers are not compatible with the mounts on the forks. I have seen an example where brackets were made to adapt R6 calipers.
BTW.. I do have a spare set of '88 calipers, if you still need them.
'88 FZR400 front calipers are the dual cylinder variety, not four, like the later FZRs, thus YZF/R6 calipers are not compatible with the mounts on the forks. I have seen an example where brackets were made to adapt R6 calipers.
BTW.. I do have a spare set of '88 calipers, if you still need them.
FZR400 (1WG): Purchased a perfectly good FZR400 with Yoshimura slip-on/EXUP, Yosh jet kit, Factory ignition advance, Racetech springs and emulators. It even had great bodywork. Like some diseased maniac I had to mess with everything good about that bike. Well, at least I have better brakes now.
FZR400RR (3TJ):Yeah, it's pink.
FZR400RR (3TJ):Yeah, it's pink.
