Hi,
Anyone knows for sure if cylinders and pistons of the 3BF (1WG) can be cleaned with Ultrasound an citric acid (ultrasound cleaner).
Is there any coating that can take harm?
Thanks
Mouser
ultrasound on cylinder
Moderators: Site Director, FZR Forum Moderators
-
- Level 3.5
- Posts: 393
- Joined: Sat Aug 25, 2012 1:29 pm
- Location: London
Re: ultrasound on cylinder
Don't think they're coated - you mean engine pistons ?
Don't read everything you believe
FZR400RR 3TJ Bimota SB6
FZR400RR 3TJ Bimota SB6
Re: ultrasound on cylinder
Hi,
Thanks for the answer, yes I mean the engine pistons.
Thanks for the answer, yes I mean the engine pistons.
-
- Level 3.5
- Posts: 393
- Joined: Sat Aug 25, 2012 1:29 pm
- Location: London
Re: ultrasound on cylinder
I used a wire brush on a drill to do the crowns of mine. If you think the oilways are blocked then I'd probably just leave them in petrol for a while.
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/IMG_3447_zpsuczfaw2c.jpg)
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/20160307_191523_zpsmkhpfgk2.jpg)
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/3TJ%20pistons_zpsfqwbrwr2.jpg)
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/IMG_3447_zpsuczfaw2c.jpg)
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/20160307_191523_zpsmkhpfgk2.jpg)
![Image](http://i109.photobucket.com/albums/n44/evilchicken0/New%203TJ/3TJ%20pistons_zpsfqwbrwr2.jpg)
Don't read everything you believe
FZR400RR 3TJ Bimota SB6
FZR400RR 3TJ Bimota SB6