Page 1 of 1
swing arm dimensions
Posted: Sun Nov 01, 2009 9:24 pm
by lrc131
can anyone tell me the distance from the pivot to the axle and the width of the pivot of a 99-02 R6 swinger?
Re: swing arm dimensions
Posted: Mon Nov 02, 2009 6:14 am
by haro504
did you check the wiki theres the 99 02 swap in there and the 0305 is floating around as well i did the 03 05 and i wound up needing a final length of 9 and 3/8 but i think it starts off at around 10in
Re: swing arm dimensions
Posted: Mon Nov 02, 2009 7:04 am
by lrc131
im trying to see if a r1 swinger from the same year is the same size
Re: swing arm dimensions
Posted: Mon Nov 02, 2009 7:06 am
by yamaha_george
lrc131 wrote:can anyone tell me the distance from the pivot to the axle and the width of the pivot of a 99-02 R6 swinger?
hi,
This is a VERY COMMON swap and has been well covered in the FORUM, so SEARCH is your pal here.
It is also written up in the WIKI as a HOW-to:-
Please put your location in your details
If you are in Timbuctu some one in New Zealand cannot recommend a source of parts etc.
Re: swing arm dimensions
Posted: Mon Nov 02, 2009 9:24 pm
by lrc131
read the post above yours...
the wikis dont give the info i need