Page 1 of 1
Foxeye Rotor Help needed
Posted: Fri Jul 23, 2010 3:33 am
by dougs
I have got to replace my front rotors (discs) are the fzr600r discs compatible with anything else? the newer yzf600 discs are bigger and mount differently
i have looked at the wiki and the foxeye 94/95 is not shown can anyone help?
Re: Foxeye Rotor Help needed
Posted: Fri Jul 23, 2010 4:24 am
by sweekster
This will sound strange but the rotors are the same as what was used on the pre fox eye 89-93 FZR 600. Part number should be 4HM-2581T-11-00 if my research is right. If you get non yamaha rotors (like EBC or Galfer) then getting a set for a FZR600 or US Spec 94-95 YZF600R should do the trick.
Hope that helps
Re: Foxeye Rotor Help needed
Posted: Fri Jul 23, 2010 4:28 am
by yamaha_george
dougs wrote:I have got to replace my front rotors (discs) are the fzr600r discs compatible with anything else? the newer yzf600 discs are bigger and mount differently
i have looked at the wiki and the foxeye 94/95 is not shown can anyone help?
D,
You will need to look at the Mico-fiche' for the foxeye series there should be a link to M-fiche' in the WIKI get the part number for the disk then compare that to the '90+ series of FZR's they should be the same BUT I am not sure.
Even if the discs are bigger once the mounting holes are the same you are cool you then just need to make a caliper mating plate to suit
To give you an idea take a look at:
http://www.saltmine.org.uk/kgb/gallery.html
You will see with all the RD's Blue streak etc the discs were never native to that model .
When you find the answer please contact me OR put the info in the WIKI for all the other guys & gals who come after you.
Thanks
Re: Foxeye Rotor Help needed
Posted: Fri Jul 23, 2010 6:52 am
by dougs
thanks for the info i will go to the breakers and get some disks and check
)
edit
i have just checked part no.s and the fzr 600 89-93 are exactly the same 298mm dia so once i have confirmed it and got em bolted to my bike i will update the wiki
Re: Foxeye Rotor Help needed
Posted: Fri Jul 23, 2010 7:51 am
by yamaha_george
dougs wrote:thanks for the info i will go to the breakers and get some disks and check
)
edit
i have just checked part no.s and the fzr 600 89-93 are exactly the same 298mm dia so once i have confirmed it and got em bolted to my bike i will update the wiki
D,
that is what I like to see the helped helping the next guy along
