genicide

streetsleeper · Post by **streetsleeper** » Fri Oct 24, 2008 4:25 pm

my little project bought for £100 has spent the last 3 years in a garden(yard) the engine was locked up anyway let the pics commence.

Post by **sweekster** » Fri Oct 24, 2008 4:32 pm

Looks like fun. Keep us updated on this.

streetsleeper · Post by **streetsleeper** » Fri Oct 24, 2008 4:35 pm

add a diversion( seca2) top yoke a tank from fleabay 99p

95FZR600 · Post by **95FZR600** » Fri Oct 24, 2008 7:04 pm

Keep us posted with lots of pics. Making a street fighter huh?

yamaha_george · Post by **yamaha_george** » Sat Oct 25, 2008 8:22 am

streetsleeper wrote:add a diversion( seca2) top yoke a tank from fleabay 99p

Certainly a different concept, where abouts are you in the UK, I'm on the west side of London out by the airport.

streetsleeper · Post by **streetsleeper** » Sat Oct 25, 2008 11:50 am

yamaha_george wrote:
streetsleeper wrote:add a diversion( seca2) top yoke a tank from fleabay 99p
Certainly a different concept, where abouts are you in the UK, I'm on the west side of London out by the airport.

down the m4 rg area

yamaha_george · Post by **yamaha_george** » Sat Oct 25, 2008 4:38 pm

streetsleeper wrote:
yamaha_george wrote:
streetsleeper wrote:add a diversion( seca2) top yoke a tank from fleabay 99p
Certainly a different concept, where abouts are you in the UK, I'm on the west side of London out by the airport.
down the m4 rg area

SS
Thro camera city out to festival town nice ride

megaloxana · Post by **megaloxana** » Sun Oct 26, 2008 1:50 pm

What is that tank from?

streetsleeper · Post by **streetsleeper** » Mon Oct 27, 2008 5:07 am

hi its a yam xtz660 tank im not a 100% sure about using it ive mounted the back of it but im trying to decide if i like the look of it

having seen the yzf conversions on here that may be the way to go

streetsleeper · Post by **streetsleeper** » Mon Oct 27, 2008 10:00 am

out with the grinder

and size up another tank

yamaha_george · Post by **yamaha_george** » Tue Oct 28, 2008 10:37 am

streetsleeper wrote:out with the grinder and size up another tank ]

Is that a "real" tank or a dummy cover since the carbs intake need some room

word of warning be prepared for a lot of carb tuning if you go real tank and individual or Paired air filter pods. NOT impossible but a fair amount of work that can be soul wrenching.

streetsleeper · Post by **streetsleeper** » Tue Oct 28, 2008 5:49 pm

its a real one

from a diversion(seca 2) and i believe the standard air box will fit under it (but il have to put the motor back together to confirm clearance) needs front and rear mounts making,and move the filler for the rad il post pics when i do it but at the moment im trying to sort out the head

streetsleeper · Post by **streetsleeper** » Mon Nov 03, 2008 4:41 pm

done a bit more sorted the head and so the motor can go back together hopefully at the weekend
just a couple of pics for ya

shredex · Post by **shredex** » Mon Nov 03, 2008 11:32 pm

before you get the bike running, you should seriously consider doing an yzf or R6 Voltage Regulator swap.
heres tommyj27's thread on it
http://fzronline.com/wiki/doku.php?id=r ... conversion
I just noticed that you have the stock one on your bike.

streetsleeper · Post by **streetsleeper** » Tue Nov 04, 2008 4:15 am

thanks for that il do that when im a bit further along

FZRSupport: the FZROnline Archive

genicide

genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide

Re: genicide