Is that an R6 header mating with a FZR motor?
Moderators: Site Director, FZR Forum Moderators
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
Hey TK.I dident see it here anywhere in the thread,but when you say stretch the header do you mean you spread the tubes out to match up with the ports?
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
Re: Is that an R6 header mating with a FZR motor?
FasterThanUr wrote:Hey TK.I dident see it here anywhere in the thread,but when you say stretch the header do you mean you spread the tubes out to match up with the ports?
That is correct.
![Thumbs Up! :thumbsup:](./images/smilies/thumbup.gif)
![Image](http://farm4.static.flickr.com/3159/2579910700_e3daba31dd_o.jpg)
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
Sweet.My header looks like s&%t and has some good dents on the bottom from the PO bottoming it out.I know what im making in the near future..thatkid wrote:FasterThanUr wrote:Hey TK.I dident see it here anywhere in the thread,but when you say stretch the header do you mean you spread the tubes out to match up with the ports?
That is correct.
Thanks
![Headbang :headbang:](./images/smilies/headbang.gif)
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
Just picked up an 02 header off
for $1 buy it now $35 shipping There wasent any pics but he has 100% feedback and I asked if there were any dents or bends and he said no.So hopefully I'll have some nice headers to mod up in a week or so ![Headbang :headbang:](./images/smilies/headbang.gif)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/ebay.gif)
![Headbang :headbang:](./images/smilies/headbang.gif)
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
Re: Is that an R6 header mating with a FZR motor?
Whoot! I've been keeping my eye out but they all have crazy shipping lately. It's BS. It costs about 15-18 to ship it. I hate ebay sometimes. With a Shipper account it's like 8-9 bucks.FasterThanUr wrote:Just picked up an 02 header offfor $1 buy it now $35 shipping There wasent any pics but he has 100% feedback and I asked if there were any dents or bends and he said no.So hopefully I'll have some nice headers to mod up in a week or so
![Image](http://farm4.static.flickr.com/3159/2579910700_e3daba31dd_o.jpg)
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
If there in good condition like he says.Major score.All the other ones on there right now for buy it now are about $70 bucks shipped.I found that one searching R6 exhaust insted of R6 header.A lot mor crap to sort through but sometimes you find some stuff thats hidingthatkid wrote:Whoot! I've been keeping my eye out but they all have crazy shipping lately. It's BS. It costs about 15-18 to ship it. I hate ebay sometimes. With a Shipper account it's like 8-9 bucks.FasterThanUr wrote:Just picked up an 02 header offfor $1 buy it now $35 shipping There wasent any pics but he has 100% feedback and I asked if there were any dents or bends and he said no.So hopefully I'll have some nice headers to mod up in a week or so
![Grinning and Nodding :grinnod:](./images/smilies/grinod.gif)
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Is that an R6 header mating with a FZR motor?
Very nice! Love the #1 finger over the decals!YAM93 wrote:I try to shamelessly plug FZROnline.com as much as possible.
I need to work on a video using everyone's bikes...
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: Is that an R6 header mating with a FZR motor?
thatkid wrote: Whoot! I've been keeping my eye out but they all have crazy shipping lately. It's BS. It costs about 15-18 to ship it. I hate ebay sometimes. With a Shipper account it's like 8-9 bucks.
the shipping costs are all up to the seller
if you put in realy high costs it warns you that it seems high and maybe you should change it.
of course, ya know, I have to drive my ass over to the Post Office on lunch, in my cage, and mail it. plus i have to get boxes, bubble wrap etc.,
so 12 bucks in postage and a 20 dollar shipping cost arent all the 'wrong' once you factor in the handling
![Smile :)](./images/smilies/icon_e_smile.gif)
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Is that an R6 header mating with a FZR motor?
I have to charge at least double what I was charging in the past. The rates are crazy!
To ship a rim/wheel is $35-45.
I shipped a 400 frame for $45.
I used to leave a ton of room around the objects that I would ship, but now I have to be conservative and reduce the overall size to keep the costs down.
To ship a rim/wheel is $35-45.
I shipped a 400 frame for $45.
I used to leave a ton of room around the objects that I would ship, but now I have to be conservative and reduce the overall size to keep the costs down.
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: Is that an R6 header mating with a FZR motor?
Thanks. I actually put one of the stickers on the left "ram air" tube. It looks pretty good there. But i have to comment that the stickers are rather thin and just putting it on already kind of messed it up, but perhaps i just pushed a little too hard... i dunno. The t-shirts are much higher quality. i saw the black design. just take out the yellow "pure sports" thing and it will look great. next time i'll get an extra-large too, i think i'm getting a little chubby in my old age. haha!<quietly posted>ragedigital wrote:Very nice! Love the #1 finger over the decals!YAM93 wrote:I try to shamelessly plug FZROnline.com as much as possible.
I need to work on a video using everyone's bikes...
of course my wife likes the way the large t-shirt fits... form fitting
![ROFL :rofl:](./images/smilies/rofl4.gif)
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
+1 I would just guesstamate the shipping when selling on E-Bay and I would always be withen a couple of dollars.ragedigital wrote:I have to charge at least double what I was charging in the past. The rates are crazy!
I used to leave a ton of room around the objects that I would ship, but now I have to be conservative and reduce the overall size to keep the costs down.
I was selling some beatle albums to help fund my move and the shipping was about $12-$15 dollars
Than I sold a lot of two records and the shipping almost doubled on me,something like $26 bucks.After e-bay and paypal fees + the shipping cost.I went from $85 bucks to like $48 bucks on the sale
![Bang Head banghead](./images/smilies/banghead.gif)
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
- FasterThanUr
- 100+ Posts
- Posts: 147
- Joined: Sat Sep 06, 2008 11:49 pm
- Location: Apple Valley,Ca
Re: Is that an R6 header mating with a FZR motor?
I got my R6 header in today and got it modded and mounted.I dont know if the 400 Fairings are shorter or if was the fact that I had glassed them into a one pice and couldent spread it,but I had to cut the crap out of it to make it fit.When i have the time i'll stretch them out to make it look right.I also needed the mid pipe to connect to my can and I found another full stock R6 system if anyone is intrested in the headers"modded or unmodded" or if anyones intrested in my Muzzy headers with mid pipe"Well 90% of the mid pipe"My cans a bolt on so im gonna have to cut off the flange for it;let me know.the Muzzy's in good shape,they had some surface rust so I cleaned them up and painted them with 1200 degree high temp paint and the mid has a pretty good dent in it.If not im just gonna throw them up on![Image](http://i29.photobucket.com/albums/c290/juffalo421/ebay.gif)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00021-4.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00022-5.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00020-4.jpg)
I also chopped my SS2R into a shorty can
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00019-4.jpg)
The Muzzy and mid
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00023-4.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00024-2.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/ebay.gif)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00021-4.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00022-5.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00020-4.jpg)
I also chopped my SS2R into a shorty can
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00019-4.jpg)
The Muzzy and mid
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00023-4.jpg)
![Image](http://i29.photobucket.com/albums/c290/juffalo421/PIC00024-2.jpg)
Check out my wifes online stores <--------
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
http://www.etsy.com/shop/ThriftStoreShoppe <-----------
http://www.etsy.com/shop/EFaceDesigns?ref=si_shop<-------- And my online stores
http://www.etsy.com/shop/MadProfessorsT ... ef=si_shop <------------
90 FZR400/98 Fzr600 engine
Tom Tom GPS
05 R1 passanger pegs
03 R6 tail
O5 R6 radiator
07 R6 rear shock
97 YZF 600 carbs
02 R6 header with a moddified V&H SSR2 carbon can
Daytona stabilizer
06 GSXR600 Front End Stainless brake lines front and back
Vortex sprockets 15/49 gearing with RK 520 XSO X-Ring Chain
76 CB750 HeadLight with HID Kit
Fasterthanur's PsychopathicCreations™
I hooked my brake light switch to my throttle,so when I hit the gas everyone would slowdown and I would be gone
![Headbang :headbang:](./images/smilies/headbang.gif)
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: Is that an R6 header mating with a FZR motor?
you can find some decent headers on ebay for about $40 shipped
http://cgi.ebay.com/ebaymotors/Yamaha-R ... 0101180536
http://cgi.ebay.com/ebaymotors/Yamaha-R ... 0101180536
![Image](http://img87.imageshack.us/img87/5392/shredexhorsey.jpg)
Re: Is that an R6 header mating with a FZR motor?
Send Nate a PM if you want him to build you one. He's in Europe right now but he should be back in a few days probably.
![Image](http://i196.photobucket.com/albums/aa312/yam93/DDsignature4.jpg)
" several meat-eaters lay in vomit, too weak to move..."
Re: Is that an R6 header mating with a FZR motor?
Whoot! Got em. Thanks guys.
![Image](http://farm4.static.flickr.com/3159/2579910700_e3daba31dd_o.jpg)
Do YOU Scopper?
"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."