Upon install the caps will give about 1/2" preload right away. They can add another 1/2" screwed all the way down for a total of 1" extra preload. There is a little bit of variance among the caps but all are roughly within an inch.
I have one set done and will finish the other two soon, but since I no longer own an FZR these are for the FZR community. Those that want some bling or are racing. So hopefully I'm not wasting my time.
![Image](https://lh4.googleusercontent.com/-rZzC9oW_HAQ/U1mmRbE53_I/AAAAAAAAI_c/vpB5jmKN0FY/s720/2014-04-24%252018.45.08.jpg)
![Image](https://lh6.googleusercontent.com/-JOcjzZRsP0U/U1mmRRAvNxI/AAAAAAAAI_g/22QPtiZ-nJ4/s720/2014-04-24%252018.45.54.jpg)
![Image](https://lh5.googleusercontent.com/-ZDwQQMi2DeQ/U1mmRYlK5_I/AAAAAAAAI_k/Ve2mF1_F2fY/s720/2014-04-24%252018.44.13.jpg)