FZRSupport: the FZROnline Archive

Greetings All,
This post has been edited. 12th April 2013
See next post.

If you have problems with your motorcycle running too rich then please read the assembly guide under the 'Jet Housing Seal'. This is a critical component on all these BDST type carburettors and it is significant because these seals must be in top condition to stop fuel leaking into the carburettor throat and needle jet (emulsion tube).
The pdf file at the bottom of the page has the Yamaha parts illustration using my part numbers.
cheers
Blair

ps. I am putting kits together for the entire FZR range.

Hi All,
I finished kits for the 3LN1, 3LN3 & 3LN5 & Zeal.
http://www.litetek.co/ReplacementPartsYamaha.html
The parts I referred to in the previous post are for the 3LN6 & 7.
This page shows a cross reference for the carb parts http://www.litetek.co/Guide_FZR250Parts.html

I also made a video about testing for viton. http://www.youtube.com/watch?v=3Kmo78b1Iik
If anyone has 3LN6 or 7 and is interested in working with me to get the kits finished for this model then I will give you a free complete kit. Just pm me.
Blair