Valve lapping tool

[redduke15]

Hi Everyone
Can anyone tell me where to get hold of a lapping tool to grind my valves in or lend me one as can't seem to find one small enough
Thanks Redduke15

[SouthendChris]

http://www.ebay.co.uk/itm/111049290651

You supply the elbow grease! Don't go mad either!

Chris

[redduke15]

Cheers Chris
Have seen these but most have a 19mm and 25mm suction cup which is too big

[reelrazor]

You can use fuel line on the stems to spin teh valves. (do it from the top side). Don't need the suction cup dealio-which in my experience aren't all that hot anyway.

[yamaha_george]

You can use fuel line on the stems to spin teh valves. (do it from the top side). Don't need the suction cup dealio-which in my experience aren't all that hot anyway.

Geeze RR is there nothing new in the world, my uncle showed me that trick when i was 13 and that was just after the dodo bird died out :-}

[reelrazor]

You can use fuel line on the stems to spin teh valves. (do it from the top side). Don't need the suction cup dealio-which in my experience aren't all that hot anyway.

Geeze RR is there nothing new in the world, my uncle showed me that trick when i was 13 and that was just after the dodo bird died out :-}

Old school all the way! People were figuring this stuff out long before I came along and knew it all...