FZRSupport: the FZROnline Archive

Ok so I need a rear seat, is there such thing as a temporary or removable seat? If not its ok, but what kind of seat can I fit here?


pic of the tail here..

reallyniceguy wrote:Ok so I need a rear seat, is there such thing as a temporary or removable seat? If not its ok, but what kind of seat can I fit here?


pic of the tail here..

Nice after market racer seat and unless it is VERY well supported it will crack with any kind of weight on it .
If you wanna ride two up then it has to be stock or a well adapted new tail piece.

i have the same air tech tail and i put a peice of 1/8x1.5 strap on the sub frame allong the inside of the tail where the passenger would sit and it worked without cracking but if you want a seat id say try the r1 passenger seat since the tail is modeled for to r1 i dont know if it would work but with that tail your gonna have to do some work mmight be easier to just swap the subframe

I had the airtech myself and recommend selling it for an R6 conversion if you want a 2-up situation. That way it would look nicer and the customizing would be minimal. I personally didn't want any passengers, so I left the airtech on mine.