My version of R6 headers on the FZR400/600. decided to retain the cross pipe between cylinders 2 & 3.
Still need to do the rear mount and may end-up raising the oil cooler a bit
Set of R6 headers on the FZR400/600
Moderators: Site Director, FZR Forum Moderators
Re: Set of R6 headers on the FZR400/600
Just took the bike for a run to test out the R6 headers. Most noticeable difference is how well it pulled after 8k and kept pulling hard right up to red line. 
With the old header it would flatten out after 9K
With the old header it would flatten out after 9K
-
turbospark
- Site Newbie
- Posts: 7
- Joined: Mon Oct 08, 2012 8:56 pm
- Location: P.R. USVI
