FZRSupport: the FZROnline Archive

Hi,
Well the amount of you guys tearing your various bikes apart ,I figure one of you would know:-

The left hand hose from rad to metal pipe to the engine is how long and what internal diameter.

Since the bike is in the workshop hanging around waiting on me feeling better I cannot go measure:-{

Anyone use the new silicon hoses yet?

tHANKS

I would love to try the silicone hoses. But no one makes a kit and I don't have time to fit one properly.

I don't know the lengths, but the hose diamaters are 5/8" and 3/4" for the stock FZR. The 5/8" lines are from the cylinder block water jackets to the thermostat housing only. Everything else is 3/4".

good info cad that was fast

cad600 wrote:I would love to try the silicone hoses. But no one makes a kit and I don't have time to fit one properly.

I don't know the lengths, but the hose diamaters are 5/8" and 3/4" for the stock FZR. The 5/8" lines are from the cylinder block water jackets to the thermostat housing only. Everything else is 3/4".

CAD
humble apologies for not saying thanks, dashed off to find some hose suppliers :-}
The repair is done as of 5 hours ago in RED silicon on the main down to the waterpump on the left frame rail .

I did find a mention of the silicon set for bikes but damned if I can now find te link

anyways thanks again for the help

Geo - No problem, I'm gladd I could help.

Haunter - Only reason I knew was I had just finished the plumbing on my FZR and had to buy a bunch of hose and fittings. Good timing I guess.

yamaha_george wrote:

cad600 wrote:I would love to try the silicone hoses. But no one makes a kit and I don't have time to fit one properly.

I don't know the lengths, but the hose diamaters are 5/8" and 3/4" for the stock FZR. The 5/8" lines are from the cylinder block water jackets to the thermostat housing only. Everything else is 3/4".

CAD
humble apologies for not saying thanks, dashed off to find some hose suppliers :-}
The repair is done as of 5 hours ago in RED silicon on the main down to the waterpump on the left frame rail .

I did find a mention of the silicon set for bikes but damned if I can now find te link

anyways thanks again for the help

Well I found the link eventually:- http://www.racebikebitz.com

They supply samco sport silicon hoses (trying to find if they deal direct

HTH

I've look them up before. They sell complete kits for certain bikes. The FZR is not one of them. Not cheap either. You can buy all of the hose diameters and fittings to piece one together though. I thought about it for a while then decided it's not visible enough with the fairings on so I passed. If you try it out, please post some picks. I'd love to see how it looks.

cad600 wrote:I've look them up before. They sell complete kits for certain bikes. The FZR is not one of them. Not cheap either. You can buy all of the hose diameters and fittings to piece one together though. I thought about it for a while then decided it's not visible enough with the fairings on so I passed. If you try it out, please post some picks. I'd love to see how it looks.

Cad,
to tell you the truth I picked the bright red hose as my bike is one of the old school RED &white with just one stripe of blue.
But I spent most of lunch gazing at it and I am not honestly convinced that the red looks better shiny yes but.....................

Some how the black I think would have been better

Wondering if anyone made any progress on this.

intending on replacing the hoses on the FZR, and if I can get a silicone kit, I will.

a

Another option on places to buy from is http://www.pegasusautoracing.com. They were alot cheaper on the brake pressure switches, but I haven't taken the time to see if their silicon hoses are cheaper or not. They do carry the sizes we need though, under the "plumbing" section on the left.

Id like to see the red silicone on a FZR. I need to upgrade my water pump with winter and that involves a new lower rad hose, but Id like my rad fil cap outside, so Im entertaining rad swaps as well and these could prove useful.

mrfreeze5 wrote:Id like to see the red silicone on a FZR. I need to upgrade my water pump with winter and that involves a new lower rad hose, but Id like my rad fil cap outside, so Im entertaining rad swaps as well and these could prove useful.

MrF,
here you go:-




PS if anyone is interested that swingarm with stainless steel custom made chain guard are for sale.
Plus I have a stainless steel radiator shield like that one shown for 25 UKP + £7 shipping to states.

That looks nice! Thanks for the pics!

95FZR600 wrote:http://www.nex-hoses.eu/index1.html

ERR 95 where do we go with that there are no links form that page to product price contacts nada ?????????????????

Tracked them down Google again <BG>

http://www.prostreetonline.com/x/nex-si ... e-kits.asp

95FZR600 wrote:

yamaha_george wrote:

95FZR600 wrote:http://www.nex-hoses.eu/index1.html

ERR 95 where do we go with that there are no links form that page to product price contacts nada ?????????????????

All fixed up. Darn link was pos. Thanks Geo.

http://www.prostreetonline.com/x/nex-si ... e-kits.asp works