FZRSupport: the FZROnline Archive

some information on doing on a r6 tail swap hear is what i am looking to do... pic is from cad600's bike sorry for stealing the pic... but i think that the tail looks hott and would live to know how to get mine like it... what parts i need to get it done and any suggestions... thanks for helping me out... mark

edit.. cad600 was the mod the credit goes to Fizzinatorr for the pic... thanks for the help...

Well thanks, but that is not my bike. I could have sworn I saw a pic of that one on here today, but I just can't find it right now. Anyway, here is a link to Rage's tail swap. viewtopic.php?f=21&t=32 He used an Airtech tail, but the princible is the same. PM 95fzr600 about it though. He did a full swap. The lights / undertail is what really makes it though. Good luck with it and keep us posted.

I believe thats fizzinatorrs old fzr600.

anyway try this on for size

Study from peoples write up and if your good with a Wrench ... You will come up with your own MoD. The Next tail i use i want it to be one that no ones used so far . maybe in a year or two LOL2

You can check out my build thread. I swapped the entire subframe over though. It was a lot of work but it turned out well.
http://www.fzrarchives.com/ipb/index.ph ... 149&st=135

That's about where I started welding the mounts for the subframe. The pages before it should show the cutting off of the old subframe etc. There are 24 pages and lots of pictures to browse though if you get bored. It was a long freaking build.

mark.deady wrote:some information on doing on a r6 tail swap hear is what i am looking to do... pic is from cad600's bike sorry for stealing the pic... but i think that the tail looks hott and would live to know how to get mine like it... what parts i need to get it done and any suggestions... thanks for helping me out... mark

edit.. cad600 was the mod the credit goes to Fizzinatorr for the pic... thanks for the help...

Did you need some help? Pm me or ask right here. I can give you a run down of what you need to buy to get started.

Where are you at on this? Pics please.

Well considering that's my old ride maybe this will help:

Parts list: R6 2002 (everything)
Tail plastic/subframe/front seat/rear seat/seat lock

the subframe was attached to the subframe by welding some mounts and some really strong bolts:

Sorry best pic I have left, Mrfreeze bought the frame from me he has more pics if you contact him


the tank is a yzf 600 painted black and red

stock fairings 1992 on the sides and front

some more pictures: