Page 1 of 1
r6 caliper
Posted: Mon Jan 19, 2009 12:17 am
by DEMORAL1ZE
is the r6 caliper and master cylinder for the front brakes a direct swap for my 93' fzr ...its an 05 r6
Re: r6 caliper
Posted: Mon Jan 19, 2009 12:54 am
by sweekster
They sure are.
Re: r6 caliper
Posted: Mon Jan 19, 2009 2:24 am
by dru86
I'm pretty sure the 05 r6 uses radial mount calipers which won't work, the master will though.
Re: r6 caliper
Posted: Mon Jan 19, 2009 2:53 am
by sweekster
If they are the ones in the pic you have there then those are from an R6s which they will fit just fine.
Re: r6 caliper
Posted: Mon Jan 19, 2009 3:46 am
by thatkid
sweekster wrote:If they are the ones in the pic you have there then those are from an R6s which they will fit just fine.
actually if you look close they look like they have the holes for radial mounting. Picture is a bit low res to tell.
Re: r6 caliper
Posted: Mon Jan 19, 2009 4:19 am
by sweekster
thatkid wrote:sweekster wrote:If they are the ones in the pic you have there then those are from an R6s which they will fit just fine.
actually if you look close they look like they have the holes for radial mounting. Picture is a bit low res to tell.
Yeah..you're rigth
Re: r6 caliper
Posted: Mon Jan 19, 2009 5:25 pm
by 95FZR600
I dont think the 05 R6 will work. Maybe a better picture will help.
Re: r6 caliper
Posted: Mon Jan 19, 2009 5:43 pm
by DEMORAL1ZE
kid was right they radial mount....any the auction ended with no bidsssssss