integrated r6 taillight
Moderators: Site Director, FZR Forum Moderators
-
milkmandan
- Site Newbie
- Posts: 4
- Joined: Fri Aug 22, 2008 2:23 pm
integrated r6 taillight
So I'm putting a 99 r6 tail on my fizzer and I got one of those integrated LED taillights for it. Now the brake lights use the same 3-pin connector as the FZR, but the turn signals only have 2 wires! how do I hook them up to the 4 wire leads on the fizzer? Thanks
-
the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: integrated r6 taillight
If it's anything like the integrated tail light I have on my fizzer, you wind up not using the two black ground wires from the turn signals. Most integrated turn signals will use the only the ground(s) hooked into the taillights/brakelights to ground the turn signals, as they usually use the same bulbs. I haven't cleaned it up yet, but when mine was installed by the previous owner, he just cut the black wires by the connectors and crimped 2 crimp connectors on the ends to keep bare wires from floating around back there. 
Hope that helps.
Hope that helps.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Re: integrated r6 taillight
Let us know how it works out and some pics would be nice!
2002 Yamaha R6-----2003 Yamaha R6
-
milkmandan
- Site Newbie
- Posts: 4
- Joined: Fri Aug 22, 2008 2:23 pm
Re: integrated r6 taillight
the_finch was correct, the two wires were the positive leads for the turn signals. Gotta love bolt on parts!
Re: integrated r6 taillight
milkmandan wrote:the_finch was correct, the two wires were the positive leads for the turn signals. Gotta love bolt on parts!
Glad to hear it worked out for ya. Now post some pics!
2002 Yamaha R6-----2003 Yamaha R6
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: integrated r6 taillight
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: integrated r6 taillight
I am using this same setup. But when I hooked up the 2 wires for the integrated signals whichever side is not flashing, the other side is flashing red. It is kinda confusing, I will get some pictures tomorrow.
D&D Full Exhaust
YZF tank swap, 99-00 R6 Tail swap
R6 Front Calipers, SS Brake Lines, YZF Master Cylinder Swap
YZF/R6 VR
04 GSX-R 600 Mirrors
Integrated Tail Light, Flanders Front Flushmounts
-
1BadFZR600
- Level 2.5
- Posts: 282
- Joined: Sat Aug 23, 2008 10:55 am
- Location: Nashville, Georgia
- Contact:
Re: integrated r6 taillight
2 wheels:
1994 Yamaha FZR 600,stage 3 dynojet,Supertrapp 16 disc exhaust,14-46 gear.
3 wheels:
1983 Honda Atc 200, superswampers, jetted,cobra exhaust..(IT REALLY FLOATS).
1984 Honda Atc 200E, Dead At the moment......
4 wheels:
1995 Chevy K-1500 Ext Cab (Blue) 2 layers of 5% tint...10in rims,33x12.59x16 mud terrian tires, dual exhaust..
Re: integrated r6 taillight
x2!megaloxana wrote:
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: integrated r6 taillight
On the bike
Crappy Video, signals were freaking out because the front ones weren't hooked up yet.
Crappy Video, signals were freaking out because the front ones weren't hooked up yet.
D&D Full Exhaust
YZF tank swap, 99-00 R6 Tail swap
R6 Front Calipers, SS Brake Lines, YZF Master Cylinder Swap
YZF/R6 VR
04 GSX-R 600 Mirrors
Integrated Tail Light, Flanders Front Flushmounts
Re: integrated r6 taillight
Here's a *BUMP* for help.
Holy crap that looks like Christmas lights.
One should just stay solid, obviously. I'm kinda glad I just kept the stupid-looking huge John Holmes stalk blinkers.
Holy crap that looks like Christmas lights.
One should just stay solid, obviously. I'm kinda glad I just kept the stupid-looking huge John Holmes stalk blinkers.
" several meat-eaters lay in vomit, too weak to move..."
-
milkmandan
- Site Newbie
- Posts: 4
- Joined: Fri Aug 22, 2008 2:23 pm
Re: integrated r6 taillight
mine does the exact same thing, there's gotta be a way to make them stop freaking out.
-
the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: integrated r6 taillight
When I got my FZR it had an integrated tail light on it already, but the previous owner removed the front turn signals. Without the front turn signals hooked up to complete the circuit, my tail light freaked out, and no matter whether you told it right or left it flashed like an emergency flasher.milkmandan wrote:mine does the exact same thing, there's gotta be a way to make them stop freaking out.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
-
milkmandan
- Site Newbie
- Posts: 4
- Joined: Fri Aug 22, 2008 2:23 pm
Re: integrated r6 taillight
Hmm, I haven't gotten my front signals in yet, hopefully that'll fix it.