Anyone have a PWC???????????
Moderators: Site Director, FZR Forum Moderators
Anyone have a PWC???????????
I love me some Jetskis/Waverunners.... I've owned 96 WaveRaider 1100, 89 sx 650 (stand-up),94vxr 650,88X-2 650 and now a 93sx 750 stand-up
States visited on my 90 FZR 1000
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
Re: Anyone have a PWC???????????
i have this
it doesn't have an engine , i got it for free off craigslist ....i'm still debating on if i should find an engine for it or if i should cut it up and make a really weird moped out of it .
it doesn't have an engine , i got it for free off craigslist ....i'm still debating on if i should find an engine for it or if i should cut it up and make a really weird moped out of it .
Got busted plastics ??? go here : viewtopic.php?f=8&t=209
Re: Anyone have a PWC???????????
Oh get a motor for that thing..It looks like a 85ish 550 or 440....Look herehttp://www.pwctoday.com/forumdisplay.php?f=13
or here http://www.pwcforum.com/pwc-jetski-classifieds/
Stand-ups are the $hit!!!! So much funner (and harder) to ride than a sit down (couch) and they are a great work out. I think of them as dirt-bikes on water..Bring a stand-up to the ocean and you have H20 moto-X....
or here http://www.pwcforum.com/pwc-jetski-classifieds/
Stand-ups are the $hit!!!! So much funner (and harder) to ride than a sit down (couch) and they are a great work out. I think of them as dirt-bikes on water..Bring a stand-up to the ocean and you have H20 moto-X....
States visited on my 90 FZR 1000
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
- megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Anyone have a PWC???????????
How much do older jet skis go for nowadays? How hard are parts to get for motor and stuff?
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Anyone have a PWC???????????
honestly i'd rather have one of these , it's an old wet bike , can't get much closer to a water dirtbike than these .
Got busted plastics ??? go here : viewtopic.php?f=8&t=209
Re: Anyone have a PWC???????????
I would like to have a PWC, but then I would need the other required equipment (truck, trailer, etc.). A pretty expensive proposition that would compete for time that could be spent bonding with my bike.
Re: Anyone have a PWC???????????
STANDUPS RULE!!!!!!!!!!!!! Along with my 87 FZR and my trx450r quad, my third baby is my 91 Kawi 650sx , with many bolt ons.. a few scratches but extremely low hours and runs like new..keeps up with 750's well , wish i had pics riding it but ...crap i dont... I have also owned and 89 Kawi X2 ....but this is better..
Keihin 42mm carb
west coast intake
west coast head w/ interchangable domes 30cc for 100 octane fun
west coast water box
"Factory" pipe (best mod for money)
stock ex manifold matched
FMF rad valve reeds
stock pistons
Skat track imp, i forget the pitch
+2 ride plate
scoop grate
Keihin 42mm carb
west coast intake
west coast head w/ interchangable domes 30cc for 100 octane fun
west coast water box
"Factory" pipe (best mod for money)
stock ex manifold matched
FMF rad valve reeds
stock pistons
Skat track imp, i forget the pitch
+2 ride plate
scoop grate
1987 FZR1000 piped, jetted, pods, painted blue just your average 20 year old bike, runnin strong
Re: Anyone have a PWC???????????
tommyj27 wrote:I would like to have a PWC, but then I would need the other required equipment (truck, trailer, etc.). A pretty expensive proposition that would compete for time that could be spent bonding with my bike.
You buy the PWC, I have the truck and trailer which ever is needed.
Re: Anyone have a PWC???????????
Oh Rockso you poor misguided soul, if you ever rode a Wetbike ( or as I like to call them Suzuki powered crap) you wouldn't want to again!!!! One thing is for sure you will get wet tryn to ride it !!!!!Get a Yamaha Waveblaster 700cc. Its the same riding position waaaaay better handling..Heres a photo of me airing one out last summer..
Medaloxana you can get a used 1 or 2 person ski with trailer for a grand or so, this is a great time to get one off e-bay!!!!!
Miller nice 650 looks like my old boat.My 750 is scary when u go wide open, 55 mph if you can hold on!!!!
Medaloxana you can get a used 1 or 2 person ski with trailer for a grand or so, this is a great time to get one off e-bay!!!!!
Miller nice 650 looks like my old boat.My 750 is scary when u go wide open, 55 mph if you can hold on!!!!
States visited on my 90 FZR 1000
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
Re: Anyone have a PWC???????????
i've never actually ridden a jet ski or wet bike , but the old videos of the wetbike looked cool . someone threw this old kawi up on craigslist for free and i went and got it . me and the water don't mix that well , i'm too out of shape to swim far if i gotta ...almost drowned in a jetti last time i went (non swimming pool) swimming . but if i come across some beat up old scooter i'm thinking of grafting it into the jet ski body because driving a jet ski on the street would be funny as hell .
Got busted plastics ??? go here : viewtopic.php?f=8&t=209
-
- 50+ Posts
- Posts: 89
- Joined: Fri May 09, 2008 12:48 pm
- Location: Omaha, Nebraska
- Contact:
Re: Anyone have a PWC???????????
I used to have a racing 95 sxi 750 bored out to a 780cc with a ton more mods. That thing was a white knuckled ride! But the lakes around here suck and fuel got too expensive to justify 3 months of riding every year.
As you can see... I wrecked it and bent it! This is why I "had" to buy it from a friend of mine.
Some of the engine mods. Bored to 780cc... shaved head.... jet kit.... pjs pipe.... wrapped gel cell battery...
stainless impeller... port and polished.... custom ride plate.... custom paint.... aluminum yoke and steering...
high amp starter.... dual 520 bilge pumps (for those water logging crashes)
I miss it alot. But requiring 98 octane or alcohol just got too expensive. Oh well... I love my FZR more.
If I lived closer to a cool lake or the ocean.... well that would be another story!
As you can see... I wrecked it and bent it! This is why I "had" to buy it from a friend of mine.
Some of the engine mods. Bored to 780cc... shaved head.... jet kit.... pjs pipe.... wrapped gel cell battery...
stainless impeller... port and polished.... custom ride plate.... custom paint.... aluminum yoke and steering...
high amp starter.... dual 520 bilge pumps (for those water logging crashes)
I miss it alot. But requiring 98 octane or alcohol just got too expensive. Oh well... I love my FZR more.
If I lived closer to a cool lake or the ocean.... well that would be another story!
Re: Anyone have a PWC???????????
Sweet sxi RC!!!!!! I havent used mine yet this year because I left my trailer in NH. I plan on going alot in the next few weeks.....I miss the Ocean.....
States visited on my 90 FZR 1000
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???
90 1000 w/ 92 USD forks w/ gold valves and Racetech springs,Technomagnesio rims, Ohlins shock,custom dog-bones,Corbin gunfighter seat,Whistler Crusader radar/laser detector,Veil anti-laser coating on plate and head lights,K&N,Yosh carbon slip-on,custom jetting,5 angle valve job & polishing,Ebc pro light contour front disks,R-1 blue dot calipers,Ebc organic pads and steel braided front brake lines,0 grav smoked windshield,carbon bar ends, frame sliders,49 tooth SS ultra light titan-tuff rear sprocket,530 chain kit,Custom ultra light rear disk, Yosh digital temp gauge....It never ends does it???