My FZR Tail Section Mod
Posted: Thu Jul 01, 2010 8:09 am
Hope you enjoy.
Used stock tail fairings and cut them in such a way that all of the mounts are being utilized.
The tail light was made by modifying the original bulb housing and relocating it behind the rearmost fairing along with cutting down the factory lens. 1 3/4 inch hole saw and done.
The bike is still a work in progress as a whole.
Used stock tail fairings and cut them in such a way that all of the mounts are being utilized.
The tail light was made by modifying the original bulb housing and relocating it behind the rearmost fairing along with cutting down the factory lens. 1 3/4 inch hole saw and done.
The bike is still a work in progress as a whole.