.. Anyways, I have more work done on the paintjob.. The black stripe has been painted around the white and you'll see it in the latter of the pictures. I've also included other pics of various parts which are undergoing a facelift as well as a pic of the bike in its current state.... (it's nekked) :oops: Here's what the concept of the paint job is:
Loosely based off this:
First shots of the RHS fairing.
Same side:
Another RHS Pic:
LHS Fairing:
LHS Pic 2:
Another LHS Pic:
Back of Tank Cover:
Another Pic of Tank Cover:
Another Tank Cover Pic:
Tail Section:
Another Tail Section:
And now onto some more pics, this time with the white graphic painted on.....
RHS Just out of the booth:
Parts:
More:
More:
Parts Unmasked:
Tail Section and Tank Cover:
Again:
LHS:
RHS Covered in Overspray (still gotta use clay bar to remove it)
RHS:
LHS:
Tank Cover once again:
And now, for the latest pics.. Including the black painted in stripe.. What a PAIN in the ass to mask this up.. took 4 hours.. sprayed 2 coats in a half hour, then removed all the masking to reveal this... (Oh, sorry bout the mess in the garage.. Haven't had the opportunity to "spring clean" it yet):
Tail Section:
Tail Section 2:
RHS Fairing:
Tank Cover:
Tank Cover 2:
Little touchups to do here and there. Unfortunately I don't have pics of the LHS Fairing as it's still at my dad's place in the garage.. When we were lifting the masking off of it, some of the red paint lifted in a couple of places and needs a touchup.. I don't know why it did, but, well it did..
And finally, here's the last few updated pics of different parts and the bike itself in its current state:
Levers & Chain Guard:
Subframe 1:
Subframe 2:
Headers - Coated in Duplicolor High Heat Paint w/Ceramic:
Nekked Bike:
I've access to an air-gun, but my buddy said he can do wonders with a rattle can from Dupont. I figured I might let him try, then just take it to the professional place if it doesn't work out.